* tests/tail-2/wait.sh: Restrict inotify specific test portion
to local file systems and also not with ---disable-inotify specified.
Failure noticed on NFS.
* tests/rm/rm1.sh: Also remove the group write bit which
was required on one NFS setup at least. Note u-w was
enough to deny file creation, g-w was also required to
deny file removal.
* tests/rm/cycle.sh: Likewise.
* tests/mv/perm-1.sh: Likewise.
* tests/cp/preserve-slink-time.sh: Add a delay between the
ln and the cp so that there is enough difference between
the timestamps so GPFS won't discard the update.
Reported by Assaf Gordon.
* tests/misc/shred-passes.sh: Specify an exact amount to shred,
to avoid running out of simulated random data on file systems
with a large st_blksize like GPFS for example.
Reported by Assaf Gordon.
tests/tail-2/F-headers.sh and test/tail-2/retry.sh fail on
on remote file systems due to tail going into inotify mode
due to not being able to determine the remoteness of the
non existent files.
* src/tail.c (any_non_remote_file): A new function used
to disable inotify when there are no open files, as
we can't determine remoteness in that case.
* NEWS: Mention the bug fix.
* gnulib: Update to latest where the only change is to
not unconditionally enable leaf optimization for fts on NFS,
as it was seen to abort() with some NFS servers as per:
https://bugzilla.redhat.com/1299169
This affects utilities that traverse directories like
cp, rm, chmod etc.
* NEWS: Adjust the improvement message to leave only XFS.
* tests/rm/dangling-symlink.sh: The effective delay was only
1.5s. So delay before the operation, and increase the iteration
count by 1 to increase the delay to 6.3s. This failure was
noticed once on a FreeBSD 10.2 x86_64 virtual machine.
* tests/dd/stats.sh: Remove quotes on sleep argument
to ensure arguments are accumulated appropriately.
* tests/du/move-dir-while-traversing.sh: sleep before operation,
to increase the effective delay from 1.6s to 3.2s.
* tests/tail-2/flush-initial.sh: Likewise.
* tests/tail-2/pipe-f2.sh: Sleep first so that the effective delay
matches the commented value.
* tests/rm/r-root.sh: This test was seen to ERROR due to
sed input not having a terminating '\n'. Therefore just skip
with diagnostics upon failure to adjust the error output with sed.
Reported by Assaf Gordon.
* init.cfg (dump_mount_list_): A new function to output the
system mount list.
* tests/df/df-symlink.sh: Call dump_mount_list_ upon failure.
* tests/df/over-mount-device.sh: Likewise.
* tests/df/problematic-chars.sh: Likewise.
* tests/df/skip-rootfs.sh: Likewise.
* tests/df/total-verify.sh: Likewise.
* tests/df/unreadable.sh: Likewise.
* tests/df/df-symlink.sh: Only check the symmetry of
the source <-> target lookup, when the source is only mounted once,
which isn't the case if '.' is a BTRFS subvolume for example.
Reported by Assaf Gordon on a default OpenSUSE 42.1 install.
* src/copy.c (copy internal): Remember directories irrespective
of their link count, because on some file systems like BTRFS,
directories always have a link count of 1.
* tests/misc/date.pl: This test was dependent on perl
unconditionally calling the system localtime() as date(1) does.
However perl has its own configure checks in place to avoid buggy
localtime implementations. Therefore comment out this test
as a FIXME for now. This test was seen to fail on FreeBSD 10
where localtime() returns nonsense values instead of failing
for arguments >= 2^56.
* tests/misc/head-c.sh: Further increase the limit, to account
for the fact that head(1) needs at least 1.576MB over the base test
command on FreeBSD 10. 4MB should be enough headroom while
still providing over allocation protection.
Reported by Assaf Gordon.
* src/operand2sig.c (operand2sig): Add a detailed comment explaining
why we validate even very large shell exit status values.
* tests/misc/kill.sh: Add a test case for the ksh scheme.
Simplify the INVALID signal number determination which also avoids
a false failure on systems like FreeBSD 10 with incomplete
signal list (caused by inaccurate NSIG).
* tests/cp/fiemap-extents.sh: Support RHEL6 fallocate
which doesn't support IEC suffixes like "MiB" on numbers.
Also add some extra framework_failure_ protections.
Reported by Assaf Gordon.
Locale categories are not equivalent on OpenBSD,
and LC_COLLATE only supports "C" for example.
Now LC_ALL is supported to set multiple other categories
on OpenBSD, so setlocale(LC_ALL, "") returns a string
indicating which categories were updated and which ignored.
Therefore...
* src/sort.c (main): ...Call setlocale(LC_COLLATE, "")
to explicitly check whether a specified LC_ALL or
LC_COLLATE environment variable value is supported
for the LC_COLLATE category. Also use !! to explicitly
convert to bool to support c89 systems where bool is an int,
and thus would get values > 1.
Reported by Assaf Gordon.
doc/coreutils.texi (dd invocation): Add oflag=sync to the streaming
example. Also reference the "direct" flag. Mention this is only
a request to the system.
* src/dd.c (usage): Mention the "sync" flag along with "nocache".
Also mention that it's only a request to drop the cache.
* THANKS.in: Add reporter Francois Rigault.
* src/stat.c (usage): Mention the '#' and '0' flags are useful with %a.
* doc/coreutils.texi (stat invocation): Likewise. Also give an example
printing unambiguous octal output.
Reported at http://bugs.debian.org/810539
commit v8.23-31-g90aa291 failed to consider this case,
where the previous rename has failed, thus causing the
following to remove the specified directory:
mv dir dir dir
* src/copy.c (copy_internal): Assume this rename attempt has
succeeded, as a previous failure will already have been handled,
and we don't want to remove the source directory in this case.
* tests/cp/duplicate-sources.sh: Consolidate this test file to...
* tests/mv/dup-source.sh: ...here. Add test cases for same
source and dest.
* tests/local.mk: Remove the consolidated test.
* NEWS: Mention the bug fix.
Reported at https://bugzilla.redhat.com/1297464
* src/wc.c (write_counts): Shell escape the file name
if it contains '\n' so only a single line per file is output.
* tests/misc/wc-files0.sh: Add a test case.
* NEWS: Mention the improvement.
* doc/coreutils.texi (numfmt invocation): Reference the description.
* src/numfmt.c: Parameterize '\n' references.
* tests/misc/numfmt.pl: Add tests for character and field processing.
* NEWS: Mention the new feature.
* doc/coreutils.texi (paste invocation): Reference -z description.
* src/paste.c (main): Parameterize the use of '\n'.
* tests/misc/paste.pl: Add test cases.
* NEWS: Mention the new feature.
* src/comm.c (main): Track the output delimiter length,
so that it can be adjusted to 1 for the NUL delimiter.
Also rename the global variable from "delimiter" to
"col_sep" so its use is more obvious, and to distinguish
from the recently added "delim" global variable.
* tests/misc/comm.pl: Adjust accordingly.
* doc/coreutils.texi (comm invocation): Reference option description.
* src/comm.c (main): Use readlinebuffer_delim() to support
a parameterized delimiter.
* tests/misc/comm.pl: Add test cases.
* NEWS: Mention the new feature.
* doc/coreutils.texi (tac invocation): Mention the
NUL delineation with an empty --separator.
* src/tac.c (main): Allow an empty separator when -r not specified.
* tests/misc/tac.pl: Add test cases.
* NEWS: Mention the new feature.
Fixes http://bugs.gnu.org/8103
* doc/coreutils.texi (cut invocation): Reference the description.
* src/cut.c: Parameterize '\n' references.
* tests/misc/cut.pl: Add tests for character and field processing.
* NEWS: Mention the new feature.
* NEWS: Mention the change in behavior.
* doc/coreutils.texi (newlineFieldSeparator): A new description,
referenced from ({join,sort,uniq} invocation).
* src/system.h (field_sep): A new inline function to determine
if a character is a field separator.
* src/join.c (usage): s/whitespace/blank/ to be more accurate
wrt which characters are field separators.
(xfields): s/isblank/field_sep/.
* src/sort.c (inittables): Likewise.
* src/uniq.c (find_field): Likewise.
* tests/misc/join.pl: Adjust -z test, and add a test/example
for processing the whole record with field processing.
* tests/misc/sort.pl: Add -z test cases, including case with '\n'.
* tests/misc/uniq.pl: Add -z -f test case with \n.
At least the false positive in tail-2/follow-stdin.sh could be seen
on a 4-core i5 system with -j8. Fix similar cases. too.
* tests/tail-2/follow-stdin.sh: Empty the 'out' file in each iteration.
Otherwise, under heavy system load, 'check_tail_output' would see the
expected output from the previous round before tail would have the
chance to come up in the background.
While at it, move the creation of the 'exp' file out of the loop.
* tests/dd/stats.sh: Empty the output file of the background process
here, too.
* tests/misc/cat-buf.sh: Likewise.
* tests/misc/stdbuf.sh: Likewise.
* tests/tail-2/wait.sh: Likewise.
This is used to discard terminal output on FreeBSD based systems.
* src/stty.c (mode_info): Add FLUSHO where supported.
(usage): Document for "local" and "combination" settings.
* doc/coreutils.texi (local stty settings): Document,
mentioning that this option is supported but ignored on GNU/Linux.
Instead of commit v8.24-132-g5171bef which only provides
control to disable this behavior (with -I), provide
the symmetrical "[-]drain" special setting.
* src/stty.c (main): Parse the [-]drain setting instead of -I,
and treat like a global option.
(usage): Adjust accordingly.
* tests/misc/stty.sh: Test "drain" with and without options.
* NEWS: Mention the new feature.
In some cases an initial drain may block indefinitely as discussed at:
http://lists.gnu.org/archive/html/coreutils/2016-01/msg00007.html
* src/stty.c (main): Use TCSANOW rather than TCSADRAIN if -I specified.
(usage): Document the new option.
* doc/coreutils.texi (stty invocation): Likewise.
* tests/misc/stty.sh: Ensure -I is supported.
* NEWS: Mention the new feature.
* doc/coreutils.texi (coreutils): Remove this direntry
so that `info coreutils` will display the table of contents,
rather than the unlikely intended coreutils Multi-call invocation.
This also supports lookups like `info coreutils readlink`,
but note that only works with the standard info viewer,
and not with pinfo for example.
* src/install.c (usage): Mention this commonly required functionality
in the -D option description.
* doc/coreutils.texi (install invocation): Likewise for the
--target-directory description.
* src/install.c (main): As an optimization, when calling
install_file_in_dir() for each file, only attempt to create
the target directory once, as this is invariant over the loop.
* src/install.c (mkancesdirs_safe_wd): Unconditionally
restore the current working directory when possibly called
multiple times (from install_file_in_dir()).
* tests/install/create-leading.sh: Add a test case.
* NEWS: Mention the fix.
Fixes http://bugs.gnu.org/21497
Since commit v8.23-60-g414a8cf, the above check failed to find sources
where the length of the longest line is a 3 or more digit number.
* cfg.mk (sc_long_lines): Remove the '\' escape character before '{'
and '}', because this would mean literal '{' and '}' characters in
an extended regular expression in sed(1).
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
Problem noted by Pádraig Brady in: http://bugs.gnu.org/22277#8
Also, make the output a bit more precise while we're at it.
* NEWS: Document this.
* src/dd.c (previous_time): Remove, replacing with ...
(next_time): New var. All uses changed.
This avoids some rounding errors, and should be a bit faster.
(newline_pending): Remove, replacing with ...
(progress_len): New var. All uses changed.
This lets us keep track of how many trailing spaces to append.
(print_xfer_stats): Get the time first thing, so that it's
closer to being correct. Count the bytes output, and append
trailing spaces if needed. Add remarks to translators about
translation lengths.
Problem reported by Linda Walsh in: http://bugs.gnu.org/17505
* NEWS: Document this.
* doc/coreutils.texi (dd invocation): Use a simpler script.
Adjust output example to match new behavior.
* src/dd.c (human_size): Remove.
All uses changed to use human_readable and ...
(human_opts): ... this new constant.
(abbreviation_lacks_prefix): New function.
(print_xfer_stats): Use it. Output both --si and --human-readable
summaries, but only if they have prefixes.
* tests/dd/reblock.sh, tests/dd/stats.sh: Test new behavior.
Mainly for these changes:
- freadptr: fix to work with ungetc on all uClibc configs
- fts: enable leaf optimization for XFS
- fts: ensure leaf optimization used for NFS
- strftime-tests: avoid false failure on OS X
- intprops-tests: avoid warnings (causing CI failures)
* NEWS: Update with items from above that are
significant from the previous coreutils release.
* doc/coreutils.texi (Connectives for test): Add notes
on precedence and associativity. Also mention the
portability caveats with these operators.
* cfg.mk: Avoid sc_prohibit_test_minus_ao for coreutils.texi.
Fixes http://bugs.gnu.org/22216
Commit v8.24-116-g896006b changed the file permissions for the tarball
using ug+rw. Better to let the umask decide whether the file should
be group-writeable or not.
* Makefile.am (dist-hook): Change chmod call from 'ug+rw' to '+rw'.
* init.cfg (get_min_ulimit_v_): Increase the determined
virtual memory limit for the command by a page size
to avoid alignment issues causing false failures for
subsequent runs.
* tests/misc/cut-huge-range.sh: Be defensive and match
the cut invocations under test, more closely with the
form used to determine the VM memory limit.
This was noticed on i686 linux at:
http://hydra.nixos.org/build/28990456
* Makefile.am (dist-hook): Ensure all files are writable
so that extracted tarballs are easy to remove, without
getting prompts about removing read-only files.
Reported by Benno Schulenberg.
We were erroneously skipping blanks in the marked comparison
_after_ the key start offset was applied.
* src/sort.c (debug_keys): Don't skip starting blanks
if already handled by begfield().
* tests/misc/sort-debug-keys.sh: Add a test case.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/22155
* src/stat.c (human_fstype): Add "overlayfs", and tag it as "remote"
to ensure that tail continues to use the more conservative polling mode.
* README-release: Remove a stale comment about updating fremote()
in tail.c. Also give a link to *_SUPER_MAGIC definitions
not in the standard linux/magic.h location.
* NEWS: Mention that this file system is recognized.
procps, bash >= 4.4, and util-linux >= 2.23
all have the -L option to output a table.
* src/kill.c (main): Have -L synonymous with -t.
Luckily there is no signal that begins with 'L'.
* tests/misc/kill.sh: Update the test.
The character 'K' representing numeric user input can be confusing,
especially in the context where it can be suffixed by the multipliers
K, M, G, etc.
Use NUM instead.
* doc/coreutils.texi (head invocation): Replace @var{k} by @var{num}.
Also change @var{count} in the paragraph about the obsolete option
syntax.
(tail invocation): Likewise. Furthermore, adjust the option order to
alphabetical sorting.
* src/head.c (usage): s/K/NUM/ in as placeholder in the -c and -n
options. Furthermore, print the actual DEFAULT_NUMBER instead of the
hard-coded 10.
* src/tail.c (usage): s/K/NUM/ in as placeholder in the -c and -n
options. Add "[+]" to clarify that NUM may optionally be preceded by
this sign. Remove the redundant explanation of the optional '+' prefix
for NUM, as that is now clear from the option description above.
Suggested by Dan Jacobson in http://bugs.gnu.org/22042
* man/head.x: Add "SEE ALSO" section referencing tail(1).
* man/tail.x: Add "SEE ALSO" section referencing head(1).
Suggested by Dan Jacobson in http://bugs.gnu.org/22041
Use a consistent date in the generated man pages
even if SOURCE_DATE_EPOCH is not set.
* Makefile.am: Generate .timestamp in the tarball.
* man/local.mk: Pass .timestamp if available to help2man.
* man/dummy-man: Don't bother with the year in the stub.
Reported in http://bugs.debian.org/806321
Sync with version 1.47.3 which provides these significant changes:
- support for reproducible builds by using $SOURCE_DATE_EPOCH.
- Adjust spacing of italic text at roman/italic boundaries.
* doc/local.mk (constants.texi): Avoid calling makeinfo unless
the constants derived from tail and shred have changed.
This avoids a dependence on makeinfo from patched sources,
and avoids an expensive makeinfo call for developers.
* doc/coreutils.texi (uniq invocation): Fix the description of
problematic input to say "blank lines" rather than "two or more
blank lines".
(tr invocation): Clarify that -s only works with SET1 when
not translating (when SET2 not specified). Also explicitly
state in examples where blank lines are deleted.
Also add "deleting" to the menu item.
* src/tr.c (usage): Improve the -s summary to say it always
operates on the last specified SET.
* doc/coreutils.texi (tail invocation): Provide an example using awk
to convert tail ==> file <== headers to file: prefixes on each line.
Suggested by Stephen Shirley.
fallocate can allocate extents beyond EOF via FALLOC_FL_KEEP_SIZE.
Where there is a gap (hole) between the extents, and EOF is within
that gap, the final hole wasn't reproduced, resulting in silent
data corruption in the copied file (size too small).
* src/copy.c (extent_copy): Ensure we don't process extents
beyond the apparent file size, since processing and allocating
those is not currently supported.
* tests/cp/fiemap-extents.sh: Renamed from tests/cp/fiemap-empty.sh
and re-enable parts checking the extents at and beyond EOF.
* tests/local.mk: Reference the renamed test.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/21790
* src/md5sum.c (digest_check): Update a matched_checksums bool upon
matched checksum, and fail (loudly unless --status is specified)
if there were no matches. Also change properly_formatted_lines
to a bool while at it since we don't need to track the plurality.
* tests/misc/md5sum.pl: Add a test case.
Suggested by Jim Meyering.
* doc/coreutils.texi (md5sum invocation): Document the new option.
* src/md5sum.c (digest_file): Return an empty digest to indicate
a missing file.
(digest_check): Don't fail or output status given an empty checksum.
(usage): Document the new option.
(main): Process and validate the new option.
* tests/misc/md5sum.pl: Add new test cases.
* NEWS: Mention the new feature.
Fixes http://bugs.gnu.org/15604
This can be useful if you want to further process data
from process substitutions. For example:
datagen | tee >(md5sum --tag) > >(sha256sum --tag) | sort
* doc/coreutils.texi (tee invocation): Mention that -p is
useful with pipes that may not consume all data.
Add an example, similar to the one above.
* THANKS.in: Add Jirka Hladky.
* tests/ls/stat-failed.sh: Skip the test if 'd' is returned as the type,
and document where this was seen. Also flag failure to write small
temp files during the test as an error rather than a failure.
Fixes http://bugs.gnu.org/21130
* src/local.mk: Run `mkdir -p src` in all our explicit rules,
as in a VPATH build the src/ dir is only created at configure time
as a side effect of dependency tracking generation.
discussed in:
http://lists.gnu.org/archive/html/coreutils/2015-10/msg00091.html
* src/csplit.c: (save_line_to_file): check fwrite failures, report
and exit immediately instead of deferring to 'close_output'.
* tests/misc/csplit-io-err.sh: test fwrite failure using LD_PRELOAD.
* tests/local.mk: add new test.
programs may not be built due to missing system dependencies,
or any program can be excluded at configure time with
--enable-no-install-program. So ensure we're not testing the
system versions in these cases.
* init.cfg (print_ver_): Call require_built_ first.
* tests/misc/tty-eof.pl: Skip programs not built.
* tests/Coreutils.pm (run_tests): Likewise.
* tests/misc/ls-misc.pl: Use 'env test' rather than abs path.
* tests/misc/test-diag.pl: Likewise.
* tests/local.mk: Adjust include order for dependencies.
* tests/misc/arch.sh: Remove redundant calls to require_built_.
* tests/misc/chroot-fail.sh: Likewise.
* tests/misc/groups-dash.sh: Likewise.
* tests/misc/groups-version.sh: Likewise.
* tests/misc/stdbuf.sh: Likewise.
* tests/cp/acl.sh: Remove problematic call to print_ver_ [gs]etfacl.
* tests/mv/acl.sh: Likewise.
* cfg.mk (sc_env_test_dependencies): A new syntax check to enforce
specifying dependencies with print_ver_ for programs
specified through the env command.
* du/bigtime.sh: Add new print_ver_ dependencies.
* du/max-depth.sh: Likewise.
* dd/ascii.sh: Likewise.
* tests/ls/capability.sh: Likewise.
* tests/ls/root-rel-symlink-color.sh: Likewise.
* tests/misc/chroot-fail.sh: Likewise.
* tests/misc/readlink-fp-loop.sh: Likewise.
* tests/misc/sort-debug-keys.sh: Likewise.
* tests/readlink/can-e.sh: Likewise.
* tests/readlink/can-f.sh: Likewise.
* tests/readlink/can-m.sh: Likewise.
* tests/tail-2/inotify-race.sh: Likewise.
* tests/tail-2/inotify-race2.sh: Likewise.
* tests/touch/no-create-missing.sh: Likewise.
* tests/touch/no-dereference.sh: Likewise.
* tests/misc/printenv.sh: Tweak to avoid syntax check trigger.
* tests/misc/help-version.sh: Likewise.
* tests/misc/yes.sh: Likewise.
* tests/misc/printf-quote.sh: Use previously unused $prog.
* configure.ac (EXTRA_MANS): Add $gl_no_install_prog to the list
so that check-x-vs-1 syntax check is satisfied.
A side effect of this cleanup is we no longer
depend on our own kill command being built.
* init.cfg (require_trap_signame_): A new function to verify
that the shell supports specifying traps by signal name.
(require_kill_group_): A new function to ensure the shell
supports sending a signal to a group.
* tests/du/move-dir-while-traversing.sh: Ensure trap supports
signal names.
* tests/misc/stty-invalid.sh: Likewise.
* tests/misc/stty-pairs.sh: Likewise.
* tests/misc/stty-row-col.sh: Likewise.
* tests/misc/stty.sh: Likewise.
* tests/misc/sort-compress.sh: Likewise. Also simplify trap call.
* tests/install/trap.sh: Likewise.
* tests/misc/timeout.sh: Likewise.
* tests/dd/stats.sh: Likewise. Also use default kill command.
* tests/misc/timeout-group.sh: Likewise.
* init.cfg (require_dirent_d_type_): Don't use df -x
to exclude XFS, since this depends on a correct mtab
which is brittle and often not correct within chroots.
* tests/d_type-check: Check also the d_type of files,
which excludes XFS appropriately. Specify all argument
and return types to avoid truncated pointers being passed,
which skipped the test due to crashes on x86_64 at least.
Simplify the C library lookup by reusing the interpreter's.
chroot issue reported at https://bugzilla.redhat.com/1263341
* src/paste.c (main): Use our styled wrapper for quotearg_colon().
* cfg.mk (sc_prohibit-quotearg): A new syntax check to avoid
future uses of unstyled quotearg to one of the internal slots,
and thus destined for diagnostic output.
* src/paste.c (main): Setting the quoting style to "escape"
went against the intent of the comment about presenting
doubled backslashes to the user. Instead use "c-maybe"
which is the only mode which avoids doubled backslashes,
and provides protection against arbitrary control characters.
* tests/misc/paste.pl: Adjust accordingly.
* src/ls.c (decode_switches): Set "shell-escape" if isatty().
* doc/coreutils.texi (ls invocation): Update the defaults description.
* NEWS: Mention the change in behavior. It should not have
backwards compat issues, but mentioning here just in case.
* src/printf.c (usage): Mention the new format.
(print_formatted): Handle the quoting by calling
out to the quotearg module with "shell-escape" mode.
* doc/coreutils.texi (printf invocation): Document %q.
* tests/misc/printf-quote.sh: New test.
* tests/local.mk: Reference new test.
* NEWS: Mention the new feature.
This is mainly noticeable when the multi-byte code
within ls.c is triggered by multi-byte quotes.
$ seq 200000 | xargs touch
$ time ls-old -U --quoting=locale --hide-control-chars >/dev/null
real 0m0.483s
$ time ls-new -U --quoting=locale --hide-control-chars >/dev/null
real 0m0.430s
* src/ls.c (quote_name): Avoid rescanning the output looking for
unprintable chars when we know the quoting mode already escapes them.
* tests/misc/ls-misc.pl: Add tests for all quoting modes, with and
without -q, to verify this assumption.
* doc/coreutils.texi (ls invocation): Describe the new
'shell-escape' and 'shell-escape-always' quoting options.
* src/ls.c (usage): Mention the new quoting options.
* tests/misc/ls-misc.pl: Add a test for 'shell-escape'
Quote file names using the "shell-escape" or "shell-escape-always"
methods, which quote as appropriate for most shells,
and better support copy and paste of presented names.
The "always" variant is used when the file name is
embedded in an error message with surrounding spaces.
* cfg.mk (sc_error_shell_quotes): A new syntax check rule
to suggest quotef() where appropriate.
(sc_error_shell_always_quotes): Likewise for quoteaf().
* src/system.h (quotef): A new define to apply shell quoting
when needed. I.E. when shell character or ':' is present.
(quoteaf): Likewise, but always quote.
* src/*.c: Use quotef() and quoteaf() rather than quote()
where appropriate.
* tests/: Adjust accordingly.
* src/md5sum.c: Use the same file name escaping method used
when generating and checking checksums. I.E. ensure a single line
per file by starting the line with '\' for any file name containing '\n'
and replacing those with "\\n".
* NEWS: Move the item from changes in behavior to improvements,
since this is no longer a backwards incompat change when
processing stdout status messages.
* tests/misc/md5sum.pl: Remove quotes from expected status output.
* tests/misc/sha1sum.pl: Likewise.
Related to commit v8.24-61-g6796698 this provides
more consistent quoting, as quotearg_colon() defaults
to "literal" quoting by default, while quote()
provides appropriate quoting for diagnostics by default.
* gl/modules/randread: Depend on quote module rather than quotearg.
* gl/lib/randread.c: Used quote() not quotearg_colon().
* src/: Likewise.
* src/shred.c: Likewise. Also avoid unnecessary quoting
introducing overhead when wiping names.
* cfg.mk: Relax the matching expression to allow
"qname" variables as used in shred.c to satisfy the check.
* tests/: Adjust accordingly.
* doc/coreutils.texi: (tail invocation): Add missing -s,
along with the existing --sleep-interval description.
(csplit invocation): s/--suffix/--suffix-format/.
(head invocation): Use same variable (COUNT) for -n and --head-count.
(seq invocation): Add opindex items for all options.
(ptx invocation): Likewise.
Fix typo s/--flac-truncation/--flag-truncation/.
(touch invocation): State explicitly that -d takes a parameter,
which also indicates that an '=' is not to be used
for the short option syntax.
(ls invocation): Likewise for the -w option.
Fixes http://bugs.gnu.org/21809
* doc/coreutils.texi (du invocation): Remove 'like' from
mentions of ISO-8601 as the components are individually conformant.
(ls invocation): Likewise, except for --time-style=iso for recent
files, where the MM-DD component is not a valid ISO-8601 timestamp.
* src/date.c (main): Use %:z rather than %z with --iso-8601
as the standard states to consistently use extended format.
Note either format can be parsed by date.
* tests/misc/date.pl: Adjust accordingly.
* doc/coreutils.texi (du invocation): Clarify that "iso"
time styles are only similar to ISO-8601.
(ls invocation): Likewise.
(date invocation): Adjust the comment stating
that only --rfc-3339 output can be parsed by date(1).
* NEWS: Mention the change in behavior.
Reported at http://bugs.debian.org/799479
* src/factor.c: Move LIKELY() definition to...
* src/system.h: ...here.
(is_nul): Reimplement with a version that doesn't
require a sentinel after the buffer, and which calls
down to (the system optimized) memcmp.
Performance analyzed at http://rusty.ozlabs.org/?p=560
* src/dd.c (alloc_obuf): Simplify the is_nul() call by
not needing to write the sentinel.
* src/copy.c (sparse_copy): Likewise.
(copy_reg): Simplify the buffer allocation by avoiding
consideration of the sentinel in the buffer size calculation.
These strings are often file names or other user specified
parameters, which can give confusing errors in
the presence of unexpected characters for example.
* cfg.mk (sc_error_quotes): A new syntax check rule.
* src/*.c: Wrap error() string arguments with quote().
* tests/: Adjust accordingly.
* NEWS: Mention the improvement.
This is especially significant when using --check
with files generated on a windows system, where the \r
characters produce corrupted and confusing error messages.
This also ensures status messages are output on a single line.
* src/md5sum.c: Use quote() for printed file names.
* tests/misc/md5sum.pl: Adjust accordingly.
* NEWS: Mention the change in behavior.
Fixes http://bugs.gnu.org/21757
* src/ls.c (main): Account for the first column not including
a separator when calculating max_idx.
* tests/ls/w-option.sh: Add a test case.
* NEWS: Mention the bug fix.
* src/ls.c (print_with_separator): Renamed from print_with_commas,
and parameterized to accept the separator to print.
Also fix an edge case where '\n' not printed when
the POS variable overflows SIZE_MAX.
(print_current_files): Degenerate -x and -C to using the
cheaper print_with_separator() in the -w0 case.
* doc/coreutils.texi (ls invocation): Document the new feature.
* tests/ls/w-option.sh: A new test.
* tests/local.mk: Reference the new test.
* NEWS: Mention the improvement.
Fixes http://bugs.gnu.org/21325
* src/ls.c (know_term_type): Corresponding to commit v8.24-48-gc249a5a,
use fnmatch to inspect the dircolors database. Noticed due to
failing tests/ls/color-{dtype-dir,term}.sh tests.
The gnulib provided sc_tight_scope target was ineffective,
as it was checking against an invalid blank regular expression,
and thus ignoring any extern function issues. This is now
fixed up in gnulib, and so we need to fix our scoping issues
before the next gnulib update.
* cfg.mk: Setup and document the tight_scope config variables
appropriately.
* src/selinux.h: Since declared in *_SOURCES, use the two line
form for the extern function declarations.
* src/set-fields.h: Add the extern declarations, and since declared
in noinst_HEADERS use the single line form.
It was a little confusing as to whether the SQUFOF algorithm was
enabled, and in fact there were no options available to enable it.
Therefore clarify the 3 configurable behaviors for the code to
3 defines at the top of the program, and only include the SQUFOF
code if enabled at compile time.
$ size src/factor-before
text data bss
93997 1412 2504
$ size src/factor-after
text data bss
87885 1404 2504
* src/factor.c: Only include the SQUFOF factor code
when enabled via the USE_SQUFOF define.
* doc/coreutils.texi (factor invocation): Update note about
factor limits, as we can factor 128 bit numbers without GMP.
* tests/local.mk (all_tests): Remove the tests 'tests/id/setgid.sh' and
'tests/mkdir/smack-root.sh' because they are mentioned in the
'all_root_tests' list; these tests are skipped anyway during a non-root
run because flagged with 'require_root_'.
sha512sum can be faster than sha256sum.
E.g., ‘dd if=/dev/zero bs=1024k count=1024 | time sha256sum’
reports 8.16 user CPU seconds on my host, whereas sha512sum
consumes 5.45 seconds (Fedora x86-64 on an AMD Phenom II X4 910e).
Although sha512sum is still considerably slower on x86, a good
chunk of uses are on 64-bit hosts and anyway there’s little point
to scaring people away from sha512sum nowadays.
* doc/coreutils.texi (sha2 utilities): Remove obsolete comment.
* src/uniq.c (main): Make the type of "nfiles" unsigned,
to avoid a brand new warning from a gcc I built from today's
sources (gcc version 6.0.0 20151015 (experimental) (GCC)):
src/uniq.c:523:14: error: assuming signed overflow does not occur \
when simplifying conditional to constant [-Werror=strict-overflow]
if (nfiles == 2)
^
* src/dircolors.c (dc_parse_stream): Support globbing of
TERM entries, to allow entries like "TERM *256color*" for example.
* src/dircolors.hin: Reduce the internal list with globbing.
* tests/misc/dircolors.pl: New test cases.
* NEWS: Mention the improvement.
* tests/rm/r-root.sh: Skip the test if there are gdb warnings
that will impact further stderr checks. For example some
buggy gdb versions may report "Got object file from memory
but can't read symbols: File truncated". Also fix an incorrect
stderr check from the previous change.
Reported by Bernhard Voelker.
* tests/rm/r-root.sh: Use gdb rather than timeout(1) as the
last resort protection against unlinkat() calls. The timeout
of 2s was susceptible to false positives under load, and
gdb is stronger protection in any case. We remove the
"expensive" tag on this test also since it should be robust.
Reported by Jim Meyering.
* tests/tail-2/follow-stdin.sh: Use the standard tail
testing framework to avoid the race seen under very high load,
and also test the non inotify case.
Reported by Jim Meyering
To reproduce:
setfacl -dm group::rx .
setfacl -dm other::rx .
make check
* init.cfg (require_no_default_acl_): A new function to skip
when default ACLs are detected, or if the getfacl utility is
not available then skip if any non LSM ACLs detected.
* tests/cp/existing-perm-race.sh: Call require_no_default_acl_.
* tests/mkdir/parents.sh: Likewise.
* tests/mkdir/perm.sh: Likewise.
* src/tail.c (fremote): No longer prompt the user to email
with the unrecognized file system constant, since we have
process in place to sync periodically with the latest Linux
constants, and the fall back polling mode is still fully functional.
* tests/cp/cp-a-selinux.sh: Ensure we skip the portion of the test
depending on restorecon to be effective. I.E. also skip when restorecon
warns, as it doesn't exit with error status when matchpathcon fails to
find a match for a file. This is the case in /tmp on Fedora for
example, in which case the new destination that cp creates will have the
default security context of the process, rather than the explicit
context we set on the source file.
Details at: http://bugzilla.redhat.com/1247641
* tests/misc/sort-compress-hang.sh: Use --foreground with the
timeout(1) command (noting the caveats), to run the sort command
in the foreground program group, and thus be responsive to Ctrl-C.
This very_expensive_ test takes over a minute on a i3-2310M,
with RAM backed /tmp.
* tests/dd/no-allocate.sh: Account for timeout(1) when
determining the required mem, as timeout has additional shared libs.
This avoids the need for the hardcoded 4M addition to the limit.
* tests/misc/head-c.sh: Increase the base limit, to account for
the fact that head(1) will allocate some additional mem in this case.
* tests/misc/cut-huge-range.sh: Remove mention of specific limits.
* tests/misc/printf-surprise.sh: Likewise.
Reported by Dmitry V. Levin
* src/tee.c (tee_files): Last arg is now char ** instead of char
const **, as that is a bit simpler. All callers changed. Modify
files[-1], not files[nfiles], as that is a bit faster and simpler.
Latter problem pointed out by Rainer Deyke in:
http://bugs.gnu.org/21611
This pacifies GCC 5 in a better way, without disabling diagnostics.
* src/df.c (main): Tell compiler that optind is positive.
* src/shred.c (known): New function.
(dopass): Go back to off_t for file sizes.
Avoid integer overflow if we run off the end of the file.
Tell compiler that a write cannot write more bytes than requested.
Avoid the intermittent loss of "... has become inaccessible" messages.
That would cause tests/tail-2/assert.sh to fail sometimes,
mainly on uniprocessor systems.
* src/tail.c (tail_forever_inotify): Also monitor IN_DELETE
events on the directory, to avoid a dentry unlink()..open() race,
where the open() on the deleted file was seen to succeed after an,
unlink() and a subsequent IN_ATTRIB, was sent to tail. Note an
IN_ATTRIB is sent on the monitored file to indicate the change in
number of links, and we can't just use a decrease in the number of
links to determine the file being unlinked, due to the possibility
of the file having multiple links.
Reported by Assaf Gordon and Ludovic Courtès.
Fixes http://bugs.gnu.org/21460
* src/shred.c (dopass): With -O2, GCC 5.1 gives "assuming signed
overflow does not occur when simplifying conditional to constant"
warnings, in regard to the signed (off_t) variables. Therefore
use unsigned (uintmax_t) instead, and a separate boolean to cater
for the special meaning of the negative part of the integer range.
Noticed at http://hydra.nixos.org/build/24983447
Includes a change to xalloc.h to avoid -Wstrict-overflow warnings
with GCC 5.1 on 32 bit with optimization enabled. A subsequent
commit will fix similar issues in shred.
* src/dircolors.hin: Add "xterm-termite" as this VTE based terminal
emulator is quite different from xterm, despite the name.
For example "Termite supports italic text and it won't work if TERM
is set to xterm. Even the backspace key won't work properly anymore
for applications relying on terminfo".
Reported also by Lukas Sabota and Sven-Hendrik Haase.
In the presence of bind mounts of a device, the 4th "mount root" field
from /proc/self/mountinfo is now considered, so as to prefer mount
points closer to the root of the device. Note on older systems with
an /etc/mtab file, the source device was listed as the originating
directory, and so this was not an issue.
Details at http://pad.lv/1432871
* src/df.c (filter_mount_list): When deduplicating mount entries,
only prefer sources nearer or at the root of the device, when the
target is nearer the root of the device.
* NEWS: Mention the change in behavior.
This includes a change to propagate the 4th "mount root"
field from /proc/self/mountinfo from the mountlist module,
which is needed in a subsequent commit in df.
* gl/lib/regcomp.c.diff: Regenerate against latest gnulib.
* gl/lib/regex_internal.c.diff: Likewise.
* gl/lib/regex_internal.h.diff: Likewise.
* cfg.mk: Exclude diffs from trailing whitespace check,
which is generally correct, and now needed.
When configured with either 'symlinks' or 'shebangs' as value for
the --enable-single-binary option, tests based on `ulimit -v` are
skipped. The reason is that the multicall 'coreutils' binary requires
much more memory due to shared libraries being loaded, and the size of
the 'date' binary (~290KiB) compared to the multicall binary (~5MiB),
of course. Finally, in the case of 'shebangs', the starting shell
requires more memory, too
Instead of using hard-coded values for the memory limit, use an
adaptive approach: first determine the amount of memory for a similar,
yet more trivial invocation of the command, and then do the real test
run using that limit (plus some buffer in some cases).
* init.cfg (require_ulimit_v_): Remove function.
(get_min_ulimit_v_): Add function to determine the minimum memory limit
required for a given command in an adaptive way.
* cfg.mk (sc_prohibit_test_ulimit_without_require_): Change the name
of the above function in the syntax-check rule.
* tests/cp/link-heap.sh: Use the above function to determine the
minimum memory required to run a command simpler than in the real test
run. Use that limit plus a buffer there. While at it, change to list
of commands in the subshell to fail also if the beginning `ulimit -v`
fails.
* tests/dd/no-allocate.sh: Likewise.
* tests/misc/csplit-heap.sh: Likewise.
* tests/misc/cut-huge-range.sh: Likewise.
* tests/misc/head-c.sh: Likewise.
* tests/misc/printf-surprise.sh: Likewise.
* tests/split/line-bytes.sh: Likewise.
* tests/rm/many-dir-entries-vs-OOM.sh: Likewise - doing it separately
for each program under test.
* src/runcon.c (main): As per the compile time warning from
libselinux-2.4-3, lookup the class with string_to_security_class(),
rather than using defines from flask.h.
* src/sort.c (main): With --debug, warn upon setlocale() failure,
which can happen due to incorrectly specified environment variables,
or due to memory exhaustion (simulated with ulimit -v), etc.
* tests/misc/sort-debug-warn.sh: Add a test case.
See also http://savannah.gnu.org/bugs/11004
du calls stat for each mount point at startup. This would block or
even make du fail if stat for an unrelated mount point hangs.
The result is not needed in the normal case anyway and therefore
should be avoided. Issue introduced in commit v8.19-2-gcf7e1b5.
* src/du.c (fill_mount_table): Move function up as it's not used ...
(mount_point_in_fts_cycle): ... here, i.e., the DI_MNT set is
initialized and filled only iff FTS has detected a directory cycle.
(main): Remove the initialization and filling of the DI_MNT set here,
and free the DI_MNT set only if it was used.
The -NUMBER option was removed from ‘shred’ in 1999, but the
manual wasn’t updated to match. Problem reported by Nick Rose in:
http://bugs.gnu.org/21502
* doc/coreutils.texi (shred invocation):
Remove documentation for -NUMBER option.
numfmt --field=LIST can accept the same options as cut.
* bootstrap.conf: remove xlist, linked-list
* src/local.mk: link numfmt with set-fields
* src/numfmt.c: use set-fields.c instead of custom field parsing code.
(include_field): adapt to new code.
* tests/misc/numfmt.pl: add new tests, adapt current tests to new
error message wording from set-fields.c
Extract the functionality of parsing --field=LIST into a separate
module, to be used by other programs.
* src/cut.c: move field parsing code from here ...
* src/set-fields.{c,h}: ... to here.
(set_fields): generalize by supporting multiple parsing/reporting
options.
(struct range_pair): rename to field_range_pair.
* src/local.mk: link cut with set-field.
* po/POTFILES.in: add set-field.c
* tests/misc/cut.pl: update wording of error messages
* src/sort.c (main): Ensure we don't free() and invalid
pointer when reading implicit stdin. Also avoid
"definitely lost" valgrind warnings in the --files0-from case.
Since commit v8.23-19-g8defcee, main() will return,
rather than call exit(), this inducing "definitely lost"
warnings in valgrind's leak checker. That precludes using
the following to flag memory leaks:
valgrind --leak-check=full --error-exitcode=1 \
--errors-for-leak-kinds=definite
* src/pr.c (main): In dev builds, explicitly free memory allocated.
* src/sort.c (main): Likewise.
* src/tail.c (main): Likewise.
* src/tsort.c (tsort): Likewise.
* src/ls.c (getenv_quoting_style, decode_switches, parse_ls_color):
Use quote() rather than quotearg(), as the latter defaults to
outputting the input unquoted.
* src/ptx.c (main): Likewise.
* src/base64.c (main): Support decimal numbers with leading zeros,
by disabling the auto detection of octal and hex. It's not
envisaged that base conversion is needed for --wrap parameters,
and in the edge case it is, $((0x0)) shell constructs can be used.
* tests/misc/base64.pl: Adjust accordingly.
* NEWS: Mention the change in behavior.
* src/base64.c (main): Use the higher level xnumtoumax()
rather than xstrtoumax(), which is simpler and improves
validation of input. Also pass the _empty_ rather than NULL
string as the suffixes parameter so that invalid trailing
characters are not allowed. For example -w08 is now
flagged as an error, rather than being interpreted as 0.
A subsequent commit will further improve verification
of numbers with leading zeros by dropping backwards compatibility
wrt auto parsing oct and hex numbers.
* tests/misc/base64.pl: Add tests for invalid wrap values.
Suggested in https://bugzilla.redhat.com/1250113
* AUTHORS: Add base32.
* THANKS.in: Add suggester.
* README: Reference the new program.
* NEWS: Mention the new program.
* src/.gitignore: Ignore the new binary.
* bootstrap.conf: Reference the gnulib base32 module.
* build-aux/gen-lists-of-programs.sh: Add base32.
* man/base32.x: A new template.
* man/.gitignore: Ignore the new man page.
* man/local.mk: Reference the new man page.
* doc/coreutils.texi (base32 invocation): Document the new command.
* src/local.mk: Adjust to build base32 based on base64.c.
* src/base64.c: Parameterize to use the correct headers,
functions and buffer sizes, depending on which binary
is being built.
* tests/misc/base64.pl: Adjust to test both base32 and base64.
* tests/misc/tty-eof.pl: Add base32 as a program that
accepts input on stdin without any options specified.
* scripts/git-hooks/commit-msg: Add base32 to the template.
* src/shred.c (usage): For -u, separate the decscription
of the short and long option, to clarify that the short option
takes no parameter.
* src/split.c (usage): Likewise for -d.
* src/tee.c (usage): Likewise for -p.
* src/uniq.c (usage): Likewise for -D.
Suggested by Stephane Chazelas
Since glibc-2.22, specifically commit [0], the opendir() implementation
implicitly makes an additional stat call thus leading to a FP.
Seen on openSUSE:Tumbleweed since snapshot 20150821.
[0]
https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=46f894d8c60a
* tests/ls/stat-free-color.sh: Change the test to verify that ls(1)
needs the same number of stat-like calls for a single, empty directory
argument as for one with a few directory entries (sub-directory,
regular file, symlink, etc.).
* doc/coreutils.texi (split invocation): Clarify that -d takes no param.
(uniq invocation): Likewise for -D.
(shred invocation): Likewise for -u.
(tee invocation): Likewise for -p.
* cfg.mk (sc_man_check_x_copyright): Add rule to ensure that non-trivial
.x files in the 'man/' subdirectory, i.e., files exceeding a line count
of 20 or a byte count of 1000, contain a proper Copyright notice.
* bootstrap.conf (gnulib_modules): Add time_rz,
since the main source code now uses timezone_t.
* src/date.c (batch_convert, main, show_date):
* src/ls.c (align_nstrftime, long_time_expected_width)
(print_long_format):
* src/stat.c (human_time):
Use timezone_t rather than boolean to specify which time zone
is wanted.
* src/ls.c (localtz): New static var.
(main): Initialize it.
* src/uname.c (usage): State that the non POSIX -i and -p options
are non-portable.
* doc/coreutils.texi (uname invocation): Mention the discrepancies
even across GNU/Linux distros, and that the results should
be used as informational only, rather than impacting any
logic decisions.
Fixes http://bugs.gnu.org/13001
* src/realpath.c (usage): Mention 'directory' in the --help
output, so that ENOTDIR errors may be more easily investigated,
by inspecting the man page.
Reported at http://pad.lv/1474519
This was detected in about 25% of runs with gcc -fsanitize=address
ERROR: AddressSanitizer: global-buffer-overflow on address ...
READ of size 4 at 0x000000416628 thread T0
#0 0x40479f in genpattern src/shred.c:782
#1 0x4050d9 in do_wipefd src/shred.c:921
#2 0x406203 in wipefile src/shred.c:1175
#3 0x406b84 in main src/shred.c:1316
#4 0x7f3454a1ef9f in __libc_start_main (/lib64/libc.so.6+0x1ff9f)
#5 0x4025d8 (/tmp/coreutils-8.23/src/shred+0x4025d8)
0x000000416628 is located 56 bytes to the left of
global variable '*.LC49' from 'src/shred.c' (0x416660) of size 17
0x000000416628 is located 12 bytes to the right of
global variable 'patterns' from 'src/shred.c' (0x416540) of size 220
SUMMARY: AddressSanitizer: global-buffer-overflow src/shred.c:782
* src/shred.c (gen_patterns): Restrict pattern selection
to the K available, which regressed due to v5.92-1462-g65533e1.
* tests/misc/shred-passes.sh: Add a deterministic test case.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/20998
* Makefile.am: Remove our dependence on src/sort which
induces awkward dependencies for `make dist` since
THANKS will be rebuilt once src/sort is newer.
Instead we remove the problematic -f option to sort
which actually doesn't change the order given
our current input.
Since non interactive shells don't generally set $SHELL,
its value is propagated through the tests and may cause issues;
for example if $SHELL implicitly adjusts $PATH when run.
Instead we set $SHELL to that determined by the posix-shell module,
and use that consistently for all test sub scripts,
including those created thorugh the `split --filter` command.
* tests/local.mk: Explicitly set $SHELL to $(PREFERABLY_POSIX_SHELL)
which defaults to $CONFIG_SHELL and thus usually /bin/sh.
* tests/envvar-check: Remove bash environment variables with
side effects, in case /bin/bash was selected for $SHELL.
* tests/misc/help-version.sh: Remove redundant initialization of $SHELL.
* tests/install/strip-program.sh: Use $SHELL for sub script.
* tests/misc/sort-compress-hang.sh: Likewise.
* tests/misc/sort-compress-proc.sh: Likewise.
* tests/misc/sort-compress.sh: Likewise.
* tests/misc/timeout-group.sh: Likewise.
* tests/rm/fail-eperm.xpl: Remove redundant elision of bash env vars.
* tests/misc/pwd-long.sh: Likewise.
tests/misc/wc-proc.sh fails when the page size is 64K
* src/wc.c (wc): The lseek adjustment should be based on st_blksize,
rather than on the internal buffer size. This is significant on
aarch64 where st_blksize in /proc is the 64K (the page size) and
thus larger than the internal buffer.
* src/split.c (main): Even though the similar processing is done
on the internal buffer size, that's based on st_blksize and
so fine in this regard. Add an assert to enforce this.
Avoid this path for the undocumented ---io-blksize option.
* m4/jm-macros.m4 (HAVE_FPSETPREC): Define if needed.
* src/numfmt.c (main): Call fpsetprec() if needed.
Fixes large-15 and large-16 test failures on 32 bit FreeBSD.
The new tests/misc/factor-parallel.sh test was
seen to fail on FreeBSD (derived) systems, which was
due to split(1) --filter reading partial lines
through pipes, as factor(1) was writing a little
over PIPE_BUF each time.
* src/factor.c (lbuf): A new structure to internally buffer lines.
(lbuf_alloc): A new function to allocate enough at program start.
(lbuf_putint): A new function to buffer a uintmax_t.
(lbuf_flush): A new function to write directly to standard output.
(lbuf_putc): A new function to buffer a character and if enough
lines are buffered, then output complete lines <= PIPE_BUF,
and continue to buffer the rest.
(main): Call the internal buffer allocator, and register
the final flush from the internal buffer at program exit.
* tests/dd/stats.sh: Wait 20s for dd to write 250MB through a fifo,
rather than 10s for 500MB. The failure was seen often on
a lightly loaded SPARC-Enterprise-T5220 running Solaris 10.
* bootstrap.conf (gnulib_modules): Add setenv, to make this
module dependency explicit; setenv is also used by split.
* src/stdbuf.c (set_LD_PRELOAD) [__APPLE__]: Use the OS X setenv
function, rather than putenv, per that documentation:
https://developer.apple.com/\
library/mac/documentation/Darwin/Reference/ManPages/man3/putenv.3.html
* src/numfmt.c (parse_field_arg): Rename parameter s/optarg/arg/,
to avoid shadowing getopt's global variable.
Otherwise, building on OS X, with --enable-gcc-warnings, I saw this:
In file included from src/numfmt.c:19:0:
src/numfmt.c: In function 'parse_field_arg':
./lib/config.h:3109:25: error: declaration of 'rpl_optarg' shadows\
a global declaration [-Werror=shadow]
* src/numfmt.c (double_to_human): Fix the argument order
passed to snprintf, which happened to work on amd64 with
its separate va_arg storage area for floats¹,
but would fail tests for example on i686.
¹ https://blog.nelhage.com/2010/10/amd64-and-va_arg/
* src/df.c (filter_mount_list): Clarify why we still stat even
though devices IDs may already be available. Note using
/proc/self/mountinfo is still an advantage to get filtered items
with accurate device patchs in chroots and with bind mounts.
I.E. on older setups with static /etc/mtab, df will now
bypass that to get the more accuracte and dynamic info.
* src/factor.c (print_uintmaxes): Comment that the
value of n_out doesn't matter on error, and add an
explicit cast to avoid any future warnings.
Suggested by Jim Meyering RE commit v8.23-229-g4d2d6c5
The LD_PRELOAD checks by -fsanitize=address are overly strict:
https://groups.google.com/forum/#!topic/address-sanitizer/jEvOJgkDqQk
A workaround is to first export LD_PRELOAD=libasan.so.2
The tests below are adjusted so that workaround is not discarded.
* tests/cp/no-ctx.sh: Append to $LD_PRELOAD.
* tests/df/no-mtab-status.sh: Likewise.
* tests/df/skip-duplicates.sh: Likewise.
* tests/ls/getxattr-speedup.sh: Likewise.
* tests/rm/r-root.sh: Likewise.
* tests/cp/nfs-removal-race.sh: Likewise. Also check that
LD_PRELOAD is effective to aid future maintainability
and avoid false failure if libasan.so.2 is not preloaded.
GCC 5.1.1 -fsanitize=undefined with glibc 2.21 is returning:
"runtime error: null pointer passed as argument 1,
which is declared to never be null"
* src/ptx.c (sort_found_occurs): Avoid the call with no entries.
* src/factor.c (n_out): A new global variable to track
how much data has been written to stdout.
(print_factors_single): Use n_out to determine whether
to flush the current (and previous) lines.
* tests/misc/factor-parallel.sh: Add a new test.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug fix.
src/seq.c (scan_arg): Set precision and width _after_ exponentiation.
For example, this will make '1.1e1 12' and '11 1.2e1' equivalent.
One can still set the precision by specifying extra precision on
the start value, or more naturally with a precision on a step value.
* tests/misc/seq-precision.sh: Add new cases.
* src/seq.c (scan_arg): Set precision to 0 for hex constants
(while avoiding hex floats). This will use then use the
fast path for these arguments. Note we also set the precision
of inf to 0 here, which ensures we use consistent precision
on output where possible.
* tests/misc/seq-precision.sh: Add corresponding test cases.
* src/seq.c (main): Call seq_fast for infinite last value.
This implicitly avoids format conversion on the
999999 -> 1000000 transition.
* src/seq.c (seq_fast): Generalize the buffer handling,
and adjust to handle the "inf" last value specifics.
* tests/misc/seq-precision.sh: A new test.
* tests/local.mk: Reference the new test.
* src/numfmt.c (MAX_UNSCALED_DIGITS): Set this to LDBL_DIG
rather than hardcoding at 18 for better portability.
* tests/misc/numfmt.pl: Restrict limit tests to supported platforms.
* src/numfmt.c (simple_strtod_int): Don't count leading zeros
as significant digits. Also have leading zeros as optional
for floating point numbers.
* tests/misc/numfmt.pl: Add test cases.
* NEWS: Mention the fix.
Due to existing limits this is usually triggered
with an increased precision. We also add further
restrictions to the output of increased precision numbers.
* src/numfmt.c (simple_round): Avoid intmax_t overflow.
(simple_strtod_int): Count digits consistently
for precision loss and overflow detection.
(prepare_padded_number): Include the precision
when excluding numbers to output, since the precision
determines the ultimate values used in the rounding scheme
in double_to_human().
* tests/misc/numfmt.pl: Add previously failing test cases.
* NEWS: Mention the fix.
* src/numfmt.c (usage): Update the --format description
to indicate precision is allowed.
(parse_format_string): Parse a precision specification
like the standard printf does.
(double_to_human): Honor the precision in --to mode.
* tests/misc/numfmt.pl: New tests.
* doc/coreutils.texi (numfmt invocation): Mention the new feature.
* NEWS: Likewise.
* src/numfmt.c: Replace field handling code with logic that understands
field range specifiers. Instead of processing a single field and
printing line prefix/suffix around it, process each field in the line
checking whether it has been included for conversion. If so convert and
print, otherwise just print the unaltered field.
(extract_fields): Removed.
(skip_fields): Removed.
(process_line): Gutted and heavily reworked.
(process_suffixed_number): FIELD is now passed as an arg instead of
using a global.
(parse_field_arg): New function that parses field range specifiers.
(next_field): New function that returns pointers to the next field in
a line.
(process_field): New function that wraps the field conversion logic
(include_field): New function that checks whether a field should be
converted
(compare_field): New function used for field value comparisons in a
gl_list.
(free_field): New function used for freeing field values in a gl_list.
Global variable FIELD removed.
New global variable all_fields indicates whether all fields should be
processed.
New global variable all_fields_after stores the first field of a N-
style range.
New global variable all_fields_before stores the last field of a -M
style range.
New global variable field_list stores explicitly specified fields to
process (N N,M or N-M style specifiers).
(usage): Document newly supported field range specifiers.
* bootstrap.conf: Include xlist and linked-list modules. numfmt now
uses the gl_linked_list implementation to store the field ranges.
* tests/misc/numfmt.pl: Add tests for 'cut style' field ranges.
Adjust existing tests as partial output can occur before an error
Remove test for the 'invalid' field -5.. this is now a valid range.
* gnulib: update to avoid compiler warnings in linked-list.
* NEWS: Mention the new feature.
* src/numfmt.c (unit_to_umax): Support SI (power of 10) suffixes
with the --from-unit and --to-unit options. Treat suffixes like
is done with --from=auto, which for example will change the meaning
of --to-unit=G to that of --to-unit=Gi. The suffix support was
previously undocumented and it's better to avoid the traditional
coreutils suffix handling in numfmt by default.
* doc/coreutils.texi: Document the new behavior. Also fix a typo
mentioning {from,to}=units=.
* tests/misc/numfmt.pl: Adjust accordingly.
* NEWS: Mention the change in behavior.
* gnulib: Update to get the new gnu-web-doc-update with --mirror option.
* README-release: Use the --mirror option in the instructions.
Also clarify and update various release steps.
* src/tail.c (recheck): Display diagnostices for replaced files
even with reused inodes which is a common case.
* tests/tail-2/F-vs-missing.sh: Use correct diagnostic in comment.
* tests/tail-2/F-vs-rename.sh: Likewise.
* src/tail.c (tail_forever_inotify): Use the fspec pointer to
distinguish previously output files, rather than a descriptor
from the inotify event. That event descriptor was that of
the parent directory when files were created or renamed etc.
(check_fspec): Adjust for the new comparison. Also show the
header when the file is truncated, since we show data
in this case also.
* tests/tail-2/F-headers.sh: A new test case.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug fix.
* .gitignore: Add entries for potentially generated headers.
Also remove a couple of items already present in lib/.gitignore.
* cfg.mk (sc_gitignore_missing): A new syntax check rule to
identify missing .gitignore entries.
(sc_gitignore_redundant): A new syntax check rule to
identify redundant .gitignore entries.
Reported by Tomas Nordin.
* configure.ac: Comment on why we link rather than run the test,
and remove the moot __ELF__ check since we never ran it anyway,
and the new CFLAGS and LDFLAGS are a more direct test of support.
* tests/misc/wc-parallel.sh: Fix a syntax error in the previous change.
* tests/misc/md5sum-parallel.sh: Use better error checking, consistent
with that used in wc-parallel.sh.
Problems reported by Michael Felt, and and part of this fix taken
from code suggested by Pádraig Brady in:
http://bugs.gnu.org/20733#112
* configure.ac (stdbuf_supported): Check for warnings, and
for -fPIC and -shared, for AIX.
* src/stat.c (STRUCT_STATVFS): Define to struct statvfs64 if
STATFS is statvfs64.
* src/sync.c (sync_arg) [_AIX]: Open in write mode,
since AIX fsync doesn't work on read-only file descriptors.
* tests/misc/wc-parallel.sh: Skip test if xargs -P does not work.
Problem reported privately by Michael Felt.
* Makefile.am (install-exec-hook):
* src/local.mk (src/coreutils_symlinks, src/coreutils_shebangs)
(clean-local):
Port to POSIX shell, which doesn't allow 'for i in ; do ...'.
* bootstrap.conf: Add "tempname" which is needed by mktemp(1).
The explicit dependency supports running gnulib-tool with
the --conditional-dependencies option, used to minimize built
modules. Note on a Fedora 22 system, that results in avoiding
redundant builds of: areadlinkat.o asnprintf.o fd-hook.o
fseterr.o printf-args.o printf-parse.o sockets.o vasnprintf.o.
However --conditional-dependencies is not enabled, since it
currently precludes the inclusion of gnulib tests.
* tests/tail-2/wait.sh: Without inotify, skip a portion of the test
that checks that -F never outputs from a tailed descriptor
after the followed name is recreated, because tail_forever()
doesn't guarantee that.
Noticed at http://hydra.nixos.org/build/22766288
* tests/misc/uniq-perf.sh: Use our standard 10s timeout,
which is sufficient to trigger the failure and also
avoids a false failure on slow/loaded systems.
Noticed at http://hydra.nixos.org/build/22766288
* src/sync.c (sync_arg): Initialise variable to avoid
unitialized access if assert is disabled.
* src/head.c (elide_tail_bytes_file): Support this function
with ---presume-input-pipe and larger files,
which regressed with commit v8.23-47-g2662702.
(elide_tail_lines_file): Likewise.
* src/dd.c (dd_copy): Explicitly don't try to ftruncate()
upon failure to lseek() (the existing check against
st_size was already protecting that).
* src/factor.c (factor_using_squfof): Assert (only when
linting due to performance) to avoid the implication of
divide by zero.
* src/od.c (read_block): Remove dead code.
* src/tac.c (tac_seekable): Likewise.
* src/ls.c (gobble_file): Likewise.
Now that we depend on gettext >= 0.19.2 remove the workaround
for issues in autopoint 0.18.3. Note the scheme currently used in
newer gettext (autopoint) to avoid these issues requires
autoconf >= 2.69, therefore we update this requirement also.
Note the gettext version dependence from gnulib comes from
gnulib using gettext macros, and coreutils indirectly depends on
the gettext module due to:
http://git.sv.gnu.org/gitweb/?p=gnulib.git;a=commitdiff;h=41dca647
bootstrap will then update m4/po.m4 and thus require a
supportng gettext version.
* bootstrap: Remove moot warning (resyncing with gnulib).
* configure.ac (AC_PREREQ): Change to 2.69 (now 3 years old).
* src/copy.c (CAN_HARDLINK_SYMLINKS): Don't enable use of linkat()
on Darwin 14, as the gnulib fallback emulation there doesn't
preserve ownership and timestamps etc. This fixes a test failure
in tests/cp/link-symlink.sh
* tests/cp/link-deref.sh: Adjust accordingly.
When the parent directory exists and has a different
default context to the final directory, the context
was incorrectly left as that of the parent directory.
* src/mkdir.c (process_dir): Because defaultcon() is called for
existing ancestors (as it must be to avoid races), then we must
unconditionally call restorecon() on the last component due to
the already documented caveat with make_dir_parents().
Alternatively you could temp disable o->set_security_context
around make_dir_parents(), but that would be subject to races.
* tests (tests/mkdir/restorecon.sh): Add a TODO for improvement.
Reference mknod and mkfifo with print_ver_.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/20616
* tests/cp/no-ctx.sh: Scope of `var=val func` is inconsistent
across shells, so avoid that construct with functions.
* tests/df/no-mtab-status.sh: Likewise.
* tests/tail-2/inotify-race.sh: `read` needs an argument.
* tests/tail-2/inotify-race2.sh: Likewise.
* cfg.mk: Various syntax-check adjustments so that it's
not assumed the $builddir is the base distribution directory.
* Makefile.am: Likewise for the 'dist' target.
* cfg.mk (sc_case_insensitive_file_names): A new syntax-check rule.
* tests/tail-2/descriptor-vs-rename.sh: Rename from
tests/tail-2/f-vs-rename.sh
* tests/local.mk: Reference the renamed test.
Reported by Jim Meyering.
* tests/dd/sparse.sh: Sync files before checking allocations,
which may be done asynchronously on NFS and BTRFS at least.
Also mark this test as very expensive on remote file systems.
* tests/du/2g.sh: Likewise, also use fallocate if available
to efficiently allocate the large file, otherwise skip
on remote file systems.
* tests/tail-2/inotify-rotate-resources.sh: Use the more
standard is_local_dir_() to check remoteness.
* tests/cp/fiemap-empty.sh: Comment on the sync issue
for this currerntly unused test.
Fixes http://bugs.gnu.org/20570
* src/timeout.c (cleanup): Don't send SIGCONT to the monitored program
when --foreground is specified, as it's generally not needed for
foreground programs, and can cause intermittent signal delivery
issues with monitors like GDB for example.
* doc/coreutils.texi (timeout invocation): Mention that SIGCONT
is not sent with --foreground.
* NEWS: Mention the behavior change.
Supporting `split --numeric-suffixes=1 -n100` for example.
* doc/coreutils.texi (split invocation): Mention the two
use cases for the FROM parameter, and the consequences on
the suffix length determination.
* src/split.c (set_suffix_length): Use the --numeric-suffixes
FROM parameter in the suffix width calculation, when it's
less than the number of files specified in --number.
* tests/split/suffix-auto-length.sh: Add test cases.
Fixes http://bugs.gnu.org/20511
* src/wc.c (usage): State that it calculates display width.
* doc/coreutils.texi (wc invocation): Detail the distinct
items used to determine the display width.
Generally if logs are truncated, they're truncated to 0 length,
so output all existing data when our heuristic determines truncation.
Note with inotify, truncate() and write() are often determined
independently and so all data would be written if that was the case.
* src/tail.c (check_fspec): Reset file offset to 0 upon truncation.
(tail_forever): Likewise.
(recheck): Add a FIXME for the related issue where tail may lose
data due to tail discounting older log files too early.
* tests/tail-2/truncate.sh: A new test.
* tests/local.mk: Reference the new test.
* NEWS: Mention the fix.
The previous fixes to races in the various tail tests,
identified actual races in the tail inotify implementation.
With --follow=descriptor, if the tailed file was replaced before
the inotify watch was added, then any subsequent changes were ignored.
Similarly in --follow=name mode, all changes to a new name were
effectively ignored if that name was created after the original open()
but before the inotify_add_watch().
* src/tail.c (tail_forever_inotify): Fix 3 cases.
1. With -f, don't stop tailing when file removed before watch.
2. With -f, watch right file when file replaced before watch.
3. With -F, inspect correct file when replaced before watch.
Existing tests identify these when tail compiled with TAIL_TEST_SLEEP.
* tests/tail-2/inotify-rotate-resources.sh:
This test also identifies the issue with --follow=name
when TAIL_TEST_SLEEP is used. Adjust so the test is immune
to such races, and also fail quicker on remote file systems.
* tests/tail-2/inotify-race2.sh: A new test using GDB,
based on inotify-race.sh, which tests the -F race
without needed recompilation with sleeps.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug.
* tests/tail-2/inotify-race.sh: Add a `wait` to ensure that
we reap all background gdb and tail processes. That resulted
in the test hanging intermittently and upon investigation was
due to gdb intermittently failing to terminate the child process
due to receiving a SIGCONT signal. Therefore we avoid using
timeout(1) which sends that signal, and instead rely on tail's
inbuilt --pid monitoring on a background sleep process.
Given this new implementation, the VERY_EXPENSIVE guard was removed.
Related issues with this test hanging were previously discussed at:
https://lists.gnu.org/archive/html/bug-coreutils/2009-12/msg00025.html
* tests/tail-2/F-vs-missing.sh: Use standard "fastpoll" options
(-s.1 --max-unchanged-stats=1) to speedup the non-inotify case.
Add the non-inotify case to the test. `wait` on the background
tail process to terminate which should avoid the need for the
non standard `retry_delay_ cleanup ...` on NFS.
* tests/tail-2/F-vs-rename.sh: Remove 'out' at the start of the loop,
to avoid a race in checking its contents. Also ensure 'a' & 'b'
files are present before the tail process starts. Use the standard
"fastpoll" options as above.
* tests/tail-2/f-vs-rename.sh: Likewise.
* tests/tail-2/append-only.sh: Use more standard variable names.
* tests/tail-2/flush-initial.sh: Use "fastpoll" options for
non-inotify platforms. Also `wait` on the background tail to avoid
stray processes and file cleanup issues on NFS.
* tests/tail-2/inotify-hash-abuse.sh: Always run non-inotify case.
Use "fastpoll" options. Use a more standard retry_delay_ instead
of a hardcoded sleep loop. Add a `wait` on the background tail.
* tests/tail-2/inotify-hash-abuse2.sh: Likewise.
* tests/tail-2/inotify-rotate-resources.sh: Wait just on the
specific tail $pid needed.
* tests/tail-2/inotify-rotate.sh: Use "fastpoll" options.
* tests/tail-2/pid.sh: Use standard variable names.
Add a `wait` on the background tails.
* tests/tail-2/pipe-f2.sh: Likewise.
* tests/tail-2/tail-n0f.sh: Likewise.
* tests/tail-2/retry.sh: Use "fastpoll" options.
* tests/tail-2/symlink.sh: Likewise.
* tests/tail-2/wait.sh: Likewise. Speedup by using sub second
parameters to timeout(1). Improve the part ensuring that
-F never follows a renamed file.
* tests/tail-2/infloop-1.sh: Remove invalid test. tail(1) was not
being passed the --pid=$yes_pid option, retry_delay_ wasn't used
to avoid races, and yes could write huge files before being killed.
* tests/local.mk: Remove the invalid test reference.
* tests/tail-2/assert-2.sh: Rewrite using retry_delay_(). Since
no longer hardcoding large delays, remove the VERY_EXPENSIVE tag.
* tests/tail-2/assert.sh: Likewise.
Without this change, very recent gcc (e.g., version 6.0.0 20150509)
would print the following when configured with --enable-gcc-warnings:
src/copy.c:165:30: error: logical 'or' of equal expressions \
[-Werror=logical-op]
&& (errno == EOPNOTSUPP || errno == ENOTSUP || errno == ENOSYS))
^
* src/system.h (is_ENOTSUP): New function.
* src/copy.c (punch_hole): Use it.
* src/ls.c (errno_unsupported, gobble_file): Use it.
* src/system.h (emit_stdin_note): A new function, refactoring
the usage note about the '-' FILE implying stdin.
* src/base64.c (usage): Use the new function to emit the
note in a standard location and with standard separation.
* src/cat.c (usage): Likewise.
* src/csplit.c (usage): Likewise.
* src/cut.c (usage): Likewise.
* src/expand.c (usage): Likewise.
* src/fmt.c (usage): Likewise.
* src/head.c (usage): Likewise.
* src/md5sum.c (usage): Likewise.
* src/nl.c (usage): Likewise.
* src/od.c (usage): Likewise.
* src/paste.c (usage): Likewise.
* src/pr.c (usage): Likewise.
* src/ptx.c (usage): Likewise.
* src/shred.c (usage): Likewise.
* src/shuf.c (usage): Likewise.
* src/sort.c (usage): Likewise.
* src/sum.c (usage): Likewise.
* src/tac.c (usage): Likewise.
* src/tail.c (usage): Likewise.
* src/tsort.c (usage): Likewise.
* src/unexpand.c (usage): Likewise.
* src/wc.c (usage): Likewise.
* src/join.c (usage): Adjust the separation used for
the message referring to FILE1 or FILE2 as stdin.
* src/comm.c (usage): Add a message using the same
wording (translation) as used in join.
* src/split.c (usage): Reword to using FILE rather than
INPUT, allowing use of emit_stdin_note(). Also remove
the mention of "fixed-size" pieces as this isn't now
always the case.
Fixes http://pad.lv/1450179
* tests/df/no-mtab-status.sh: getmntent is no longer called
when /proc/self/mountinfo is present, thus causing the test
to be skipped. Therefore wrap fopen() to ignore mountinfo,
and use the test genmntent table instead.
* tests/df/skip-duplicates.sh: Likewise.
* src/coreutils.c (usage): include coreutils.h outside
the printf call, because if it's a macro you will get the error:
embedding a #include directive within macro arguments is not supported
* src/yes.c (main): Simplify the logic so that the
compiler can see this function always returns a value.
This was seen with GCC 5.0 in SINGLE_BINARY mode.
* tests/ls/no-cap.sh: Ensure the test isn't skipped even if
capability coloring is disabled in the current $LS_COLORS.
Also just enable/disable capability coloring to avoid the
dircolors(1) overhead.
gnulib now only checks that the printf routines never crash,
which is all coreutils currrently requires, and so we revert
commit v8.23-81-gf57bfbb to let gnulib decide whether to replace
the system printf routines.
With GCC 5 and the newly added warnings from gnulib, ensure the
correct signed integer is passed for the printf format,
to avoid -Werror=format= failures.
* bootstrap.conf: 0.19.2 is available on openSUSE-13.2,
Debian-8.0, and Ubuntu-14.10. Given there were issues
with earlier 0.19 gettext releases, set this as the new minimum.
* configure.ac (AM_GNU_GETTEXT_VERSION): Likewise.
Reported by Bernhard Voelker
* doc/coreutils.texi (truncate invocation): The word 'their' is
incorrect; 'each file' is the antecedent, and is singular,
so 'its' is the correct pronoun.
* src/longlong.h: Sync with the latest longlong.h from libgmp to:
- Use __builtin_c[lt]zl on arm64.
- Fix sparc64 vis3 build failure due to missing __clz_tab.
- Avoid a clang build issue on mips.
- Support thumb2 arm 32 bit system.
* src/cfg.mk (sc_ensure_comma_after_id_est): Exclude longlong.h
to ease merges.
All warnings were of the form: "assuming signed overflow does not occur
when simplifying conditional to constant [-Werror=strict-overflow]"
* src/dd.c (cache_round): Use an appropriately sized unsigned type,
to avoid possibility of undefined signed overflow.
* src/mknod.c (main): Likewise.
* src/pr.c (pad_down): Likewise.
* src/wc.c (main): Likewise.
* src/tail.c (main): Assert that argc >= 0 thus allowing the
compiler to assume without implication that argc - optind
is positive.
* src/dircolors.hin: Add the MISSING entry, to indicate
this as a possibility in new templates output from dircolors,
and also to ease comparison with existing databases that
generally do define a MISSING entry.
* doc/coreutils.texi (cp invocation): Mention that when copying files
without preserving permissions, the umask or a default ACL affect
the mode of new files.
* THANKS.in: Remove committer.
Related to http://bugs.gnu.org/8527
* doc/coreutils.texi: `mkfifo' and `mknod' use the optContext macro
which adds a description for the SELinux security context in addition to
the single option already described in each case. The result in both
cases is two options being introduced as `option' (singular). Fix this
by introducing them as `options' (plural).
Conditional jump or move depends on uninitialised value(s)
at 0x40380C: get_field_values (df.c:840)
by 0x403E16: get_dev (df.c:994)
by 0x404D65: get_all_entries (df.c:1364)
by 0x405926: main (df.c:1714)
* src/df.c (get_dev): Initialize the fsu.fsu_bavail_top_bit_set
member, when adding placeholder entries.
(main): Avoid a "definitely lost" memory leak warning from valgrind,
reported by Bernhard Voelker.
* src/ls.c (usage): Add punctuation to avoid ambiguity in the
description of the --time option. Mention that both the -u
and --sort=time default order is newest first.
* src/tail.c (tail_forever_inotify): Only monitor write()s and
truncate()s to files in --follow=descriptor mode, thus avoiding
the bug where we removed the watch on renamed files.
Also adjust the inotify event processing code that is
now significant only in --follow=name mode.
* tests/tail-2/F-vs-rename.sh: Improve this existing test by running
in both polling and inotify modes.
* tests/tail-2/f-vs-rename.sh: A new test based on the existing one.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug.
Fixes http://bugs.gnu.org/19760
* tests/fs/skip-duplicates.sh: On this platform .mnt_opts is significant
so define to empty to avoid a NULL deref in read_file_system_list().
Fixes http://bugs.gnu.org/20210
* src/date.c (usage): Use FMT rather than TIMESPEC as the parameter,
since it's simpler to understand and can be better aligned.
Give an example for the --iso-8601 output format.
Adjust the example used for the 3 standard formats to be unambiguous
with respect to day/mon ordering and use of leading zeros in the time.
Reorder the options descriptions slightly, so that the
3 standards options are together.
Indent the multi-line descriptions so that grouping is obvious.
Remove a redundant description of the --rfc-3339 format,
which is obvious in the existing example.
Separate these 3 standards options to their own translatable string
to simplify translation.
Change 'date and time' to 'date/time' in the --iso-8601 description
to be consistent with --rfc-3339 and to help avoid the implication
that the time is always output or even output by default.
Fixes http://bugs.gnu.org/20203
* README-release: Reference http://www.gnu.org/s/coreutils/manual.css
to apply basic styling to the online coreutils manual, consistent
with the Emacs documentation.
* src/wc.c (wc): Allow any block to select the count implementation,
rather than just using the first 10 lines. This also simplifies
the code from 3 loops to 2.
* cfg.mk (sc_tests_executable): The previous commit avoided
the globbing, but also passed on the quoted wildcards to find(1).
We could use eval to handle the quoting, though that's a bit
awkward and dangerous, so instead explicitly disable globbing
for the whole make target subshell. Note noglob is not available
on solaris, where we fall back to set -f. Note also that zsh
uses set -F for this, but that's moot here. Also correct the
find(1) expression to include the -o between each wildcard.
* cfg.mk (sc_tests_executable): If there are files with
$TEST_EXTENSIONS in the current directory, then the
lack of quoting of the $test_extensions_rx contents
could result in globbing and an inconsequential run.
find(1) produces warnings only with more than one expansion.
Using a test file generated with:
yes | head -n100M > 2x100M.txt
before> time wc -l 2x100M.txt
real 0.842s
user 0.810s
sys 0.033s
after> time wc -l 2x100M.txt
real 0.142s
user 0.111s
sys 0.031s
* src/wc.c (wc): Split the loop that deals with -l into 3.
The first is used at the start of the input to determine if
the average line length is < 15, and if so the second loop is
used to look for '\n' internally to wc. For longer lines,
memchr is used as before to take advantage of system specific
optimizations which any outweigh function call overhead.
Note the first 2 loops could be combined, though in testing,
GCC 4.9.2 at least, wasn't sophisticated enough to separate
the loops based on the "check_len" invariant.
Note also __builtin_memchr() isn't significant here as
GCC currently only applies constant folding with that.
* NEWS: Mention the improvement.
* src/yes.c (main): Even when the internal buffer isn't large enough,
output what we've buffered already, and interate over the rest.
This improves the performance in the edge case where there are
many small arguments that overflow the buffer.
* tests/misc/yes.sh: Add a test case for the many small arguments case.
yes(1) may be used to generate repeating patterns of text
for test inputs etc., so adjust to be more efficient.
Profiling the case where yes(1) is outputting small items
through stdio (which was the default case), shows the overhead
of continuously processing small items in main() and in stdio:
$ yes >/dev/null & perf top -p $!
31.02% yes [.] main
27.36% libc-2.20.so [.] _IO_file_xsputn@@GLIBC_2.2.5
14.51% libc-2.20.so [.] fputs_unlocked
13.50% libc-2.20.so [.] strlen
10.66% libc-2.20.so [.] __GI___mempcpy
1.98% yes [.] fputs_unlocked@plta
Sending more data per stdio call improves the situation,
but still, there is significant stdio overhead due to memory copies,
and the repeated string length checking:
$ yes "`echo {1..1000}`" >/dev/null & perf top -p $!
42.26% libc-2.20.so [.] __GI___mempcpy
17.38% libc-2.20.so [.] strlen
5.21% [kernel] [k] __srcu_read_lock
4.58% [kernel] [k] __srcu_read_unlock
4.27% libc-2.20.so [.] _IO_file_xsputn@@GLIBC_2.2.5
2.50% libc-2.20.so [.] __GI___libc_write
2.45% [kernel] [k] system_call
2.40% [kernel] [k] system_call_after_swapgs
2.27% [kernel] [k] vfs_write
2.09% libc-2.20.so [.] _IO_do_write@@GLIBC_2.2.5
2.01% [kernel] [k] fsnotify
1.95% libc-2.20.so [.] _IO_file_write@@GLIBC_2.2.5
1.44% yes [.] main
We can avoid all stdio overhead by building up the buffer
_once_ and outputting that, and the profile below shows
the bottleneck moved to the kernel:
$ src/yes >/dev/null & perf top -p $!
15.42% [kernel] [k] __srcu_read_lock
12.98% [kernel] [k] __srcu_read_unlock
9.41% libc-2.20.so [.] __GI___libc_write
9.11% [kernel] [k] vfs_write
8.35% [kernel] [k] fsnotify
8.02% [kernel] [k] system_call
5.84% [kernel] [k] system_call_after_swapgs
4.54% [kernel] [k] __fget_light
3.98% [kernel] [k] sys_write
3.65% [kernel] [k] selinux_file_permission
3.44% [kernel] [k] rw_verify_area
2.94% [kernel] [k] __fsnotify_parent
2.76% [kernel] [k] security_file_permission
2.39% yes [.] main
2.17% [kernel] [k] __fdget_pos
2.13% [kernel] [k] sysret_check
0.81% [kernel] [k] write_null
0.36% yes [.] write@plt
Note this change also ensures that yes(1) will only write
complete lines for lines shorter than BUFSIZ.
* src/yes.c (main): Build up a BUFSIZ buffer of lines,
and output that, rather than having stdio process each item.
* tests/misc/yes.sh: Add a new test for various buffer sizes.
* tests/local.mk: Reference the new test.
Fixes http://bugs.gnu.org/20029
In certain parallel build situations this would give the error:
help2man: can't get `--help' info from man/test.td/[
Makefile:14189: recipe for target 'man/test.1' failed
* man/local.mk (test.1): Depend on `[` rather than `test`,
as `test --help` outputs nothing. Also move dir.1 and vdir.1
back to the main list, as they're no more exceptions than
sha1sum etc.
With "umask 0027" or even "umask 0077", the git clone of coreutils
does not have the executable bit set for 'other' (or 'group).
Therefore, "make syntax-check" would fail.
* cfg.mk (sc_tests_executable): Change the -perm argument of find(1)
to only print the names of the files which are not executable by the
user, rather than insisting on ugo+x (octal 111).
Adjust commit v8.23-140-gfdd6ebf to add the --output-error option
instead of --write-error, and treat open() errors like write() errors.
* doc/coreutils.texi (tee invocation): s/write-error/output-error/.
* src/tee.c (main): Exit on open() error if appropriate.
* tests/misc/tee.sh: Add a case to test open() errors.
* NEWS: Adjust for the more general output error behavior.
Suggested by Bernhard Voelker.
Note that IBRIX used to have a different magic number 0x013111A7
instead of the current 0x013111A8. However, the former is no longer
used and the version of IBRIX it was used in is really ancient, so
it's extremely unlikely anyone is still using it. Therefore, just
add the newer magic number.
Mark IBRIX as a 'remote' file system type as inotify support had
never been officially tested with it.
* src/stat.c (human_fstype): Add file system ID definition.
* NEWS: Mention the improvement.
Fixes http://bugs.gnu.org/19951
tee is very often used with pipes and this gives better control
when writing to them. There are 3 classes of file descriptors
that tee can write to: files(1), pipes(2), and early close pipes(3).
Handling write errors to 1 & 2 is supported at present with the caveat
that failure writing to any pipe will terminate tee immediately.
Handling write errors to type 3 is not currently supported.
To improve the supported combinations we add these options:
--write-error=warn
Warn if error writing any output including pipes.
Allows continued writing to still open files/pipes.
Exit status is failure if any output had error.
--write-error=warn-nopipe, -p
Warn if error writing any output except pipes.
Allows continued writing to still open files/pipes.
Exit status is failure if any non pipe output had error.
--write-error=exit
Exit if error writing any output including pipes.
--write-error=exit-nopipe
Exit if error writing any output except pipes.
Use the "nopipe" variants when files are of types 1 and 3, otherwise
use the standard variants with types 1 and 2. A caveat with the above
scheme is that a combination of pipe types (2 & 3) is not supported
robustly. I.e. if you use the "nopipe" variants when using both type
2 and 3 pipes, then any "real" errors on type 2 pipes will not be
diagnosed.
Note also a general issue with type 3 pipes that are not on tee's
stdout, is that shell constructs don't allow to distinguish early
close from real failures. For example `tee >(head -n1) | grep -m1 ..`
can't distinguish between an error or an early close in "head" pipe,
while the fail on the grep part of the pipe is distinguished
independently from the resulting pipe errors. This is a general
issue with the >() construct, rather than with tee itself.
* NEWS: Mention the new feature.
* doc/coreutils.texi (tee invocation): Describe the new option.
* src/tee.c (usage): Likewise.
(main): With --write-error ignore SIGPIPE, and handle
the various exit, diagnostics combinations.
* tests/misc/tee.sh: Tess all the new options.
Fixes http://bugs.gnu.org/11540
This is a cleanup to the previous commit v8.23-138-g7ceaf1d.
* src/tee.c (tee_files): Do not exempt the "-" file from being closed,
as this is no longer stdout but a normal file.
Since v5.2.1-1247-g8dafbe5, tee(1) treated '-' as stdout while POSIX
explicitly requires to treat this as a file name. Revert this change,
as the interleaved output - due to sending another copy of input to
stdout - is not considered to be useful. Discussed in
http://lists.gnu.org/archive/html/coreutils/2015-02/msg00085.html
* src/tee.c (tee_files): Remove the special handling for "-" operands.
(usage): Remove the corresponding sentence.
* doc/coreutils.texi (common options): Remove the "tee -" example.
(tee invocation): Document that tee(1) now treats "-" as a file name.
* tests/misc/tee.sh: Add a test case for "tee -".
While at it, re-indent the above multi-argument processing case and
extend that to 13 operands, as POSIX mandates that, too.
* tests/misc/tee-dash.sh: Remove now-obsolete test.
* tests/local.mk (all_tests): Remove the above test.
* NEWS (Changes in behavior): Mention the change.
* src/tee.c (main): Don't continue reading if we can't
output anywhere.
* tests/misc/tee.sh: Ensure we exit when no more outputs.
* NEWS: Mention the change in behavior.
* tests/init.sh (returns_): Disable tracing for this wrapper
function, so that stderr of the wrapped command is unchanged,
allowing for verification of the contents.
* cfg.mk (sc_prohibit_strncmp): Improve the search pattern: use
_sc_search_regexp to find all invocations of strncmp except when
used on a macro definition line; just match the function name with
an opening parenthesis. Before, the expression missed places where
the comparison against 0 was in a subsequent line.
* src/system.h (STRNCMP_LIT): Shorten 'literal' to 'lit' to move
the whole definition of the macro into one line - thus making
sc_prohibit_strncmp pass.
(STRPREFIX): Add space before parenthesis.
* src/du.c (main): Prefer STREQ_LEN over strncmp.
* src/pinky.c (scan_entries): Likewise.
* src/tac.c (tac_seekable): Likewise.
* src/who.c (scan_entries): Likewise.
This setting is unusual on BSD as it's read normally in the local
flags returned by tcgetattr(), but can only be set with an ioctl.
Setting with tcsetattr() is ignored.
* src/stty.c (NO_SETATTR): A new flag to indicate the setting
is read and displayed like a normal termios flag, but is set
in some other manner.
(main): Skip tcsetattr() for this setting when this flag is set.
Also fixup the exiting 'extproc' processing to handle the
'-extproc' case correctly.
(sane_mode): Skip setting '-extproc' for 'sane' to avoid the error.
This isn't ideal but matches the operation of the BSD native stty.
* .mailmap (jeff.liu@oracle.com): There are 3 different names in the
'git log' output for this email address; choose "Jeff Liu" as canonical
form.
(Алексей Шилин): Convert name to latin1 ("Aleksej Shilin")
to improve the sort order of the generated 'THANKS' file.
At least 'sort' on openSUSE/Fedora have a bug in the case-folding code
of their I18N downstream patch which leads to wrong sort results,
e.g. "Dániel" coming after "Dylan".
* Makefile.am (THANKS): Sort the final contributor list using our
own sort implementation - as others may result in a different order;
add a FIXME comment to remove this again once common platforms have
a functional 'sort -f'. Add '-k1,1' for a better sort order.
While at it, save a grep and perl call to prepare the list from
'THANKS.in' by doing all in the first perl call.
This includes a change to require --with-libmount
to be used with configure, due to the many libmount dependencies.
* bootstrap: Sync with gnulib to exit early on gnulib-tool error.
* gl/lib/tempname.c.diff: Adjust for gnulib changes.
* gl/lib/tempname.h.diff: Likewise.
* gl/modules/tempname: Likewise.
* doc/.gitignore: Add new gendocs_template_min gnulib script.
* cfg.mk: Add .diff files to the exclusion expression
for sc_long_lines, since the gnulib code might be >= 80 chars.
Note 80 char lines trigger due to the added +/- diff marks.
Also normalize the $$ used in the other sc_long_lines exclusion
expressions.
* src/ls.c (align_nstrftime): Be defensive and validate the tm_mon
index before using to access the abmon array. This was _not_ seen
to be an issue any system. See https://bugzilla.redhat.com/1190454
* doc/coreutils.texi (Random sources): Give an example using openssl,
generating a reproducible arbitrary amount of randomly distributed
data, given a seed value.
The construct "diff ... || diff=1 || diff=" does not set the variable
in all cases. This could be triggered with:
$ env make diff=1 make sc_dd_O_FLAGS
dd_O_FLAGS
maint.mk: ./src/dd.c has inconsistent O_ flag lists
cfg.mk:59: recipe for target 'sc_dd_O_FLAGS' failed
make: *** [sc_dd_O_FLAGS] Error 1
* cfg.mk (sc_dd_O_FLAGS): Remember $? of the diff command directly
and check its value later rather than using the above mentioned
mapping.
The previous commit v8.23-124-g7b1ca5f made the above syntax-check rule
fail, because that took the whole content of THANKS.in for comparison.
* cfg.mk (sc_THANKS_in_duplicates): Strip off the header (all before the
first empty line) and the footer (all past the next empty line) from
'THANKS.in' for the check.
* THANKS.in: Document the preferred sort order as a comment
at the top of the file. Change "Марк Коренберг" to latin1
("Mark Korenberg"). Sort all entries.
* cfg.mk (sc_THANKS_in_sorted): Add rule to ensure that
'THANKS.in' remains sorted.
Each user has a maximum number of inotify watches,
so handle the cases where we exhaust these resources.
* src/tail.c (tail_forever_inotify): Ensure we inotify_rm_watch()
the watch for an inode, when replacing with a new watch for a name.
Return all used inotify resources when reverting to polling.
Revert to polling upon first indication of inotify resource exhaustion.
Revert to polling on any inotify resource exhaustion.
Diagnose resource exhaustion correctly in all cases.
Avoid redundant reinsertion in the hash for unchanged watches
(where only attributes of the file are changed).
* tests/tail-2/retry.sh: Avoid false failure when reverting to polling.
* tests/tail-2/inotify-rotate.sh: Likewise.
* tests/tail-2/symlink.sh: Likewise.
* tests/tail-2/inotify-rotate-resources.sh: New test to check
that we're calling inotify_rm_watch() for replaced files.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug fix.
* THANKS.in: Thanks for reporting and problem identification.
* tests/tail-2/inotify-rotate.sh (cleanup_fail_): Set fail=1
so that failures are identified. Regression in v8.23-63-g111a2b9
Also use print_ver_ rather than open coding --verbose support.
Also check for more than a single 'b' which seems brittle.
The -fsanitize=address run associated with v8.22-75-gf940fec
failed to check make-prime-list, as src/primes.h is not
regenerated with `make clean`. Running with -fsanitize=address
indicates a read 1 byte beyond the allocated buffer.
$ rm src/make-prime-list.o
$ make AM_CFLAGS=-fsanitize=address src/make-prime-list
$ src/make-prime-list 5000
=================================================================
==13913==ERROR: AddressSanitizer: heap-buffer-overflow on address
0x61e00000fa43 at pc 0x4016f5 bp 0x7fff9d9840e0 sp 0x7fff9d9840d0
READ of size 1 at 0x61e00000fa43 thread T0
#0 0x4016f4 in main src/make-prime-list.c:214
#1 0x7f98892c5fdf in __libc_start_main (/lib64/libc.so.6+0x1ffdf)
#2 0x401774 (src/make-prime-list+0x401774)
0x61e00000fa43 is located 0 bytes to the right of 2499-byte
region [0x61e00000f080,0x61e00000fa43) allocated by thread T0 here:
#0 0x7f98896ba7b7 in malloc (/lib64/libasan.so.1+0x577b7)
#1 0x400f3f in xalloc src/make-prime-list.c:163
#2 0x400f3f in main src/make-prime-list.c:198
SUMMARY: AddressSanitizer: heap-buffer-overflow
src/make-prime-list.c:214 main
Shadow bytes around the buggy address:
0x0c3c7fff9ef0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3c7fff9f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3c7fff9f10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3c7fff9f20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3c7fff9f30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
=>0x0c3c7fff9f40: 00 00 00 00 00 00 00 00[03]fa fa fa fa fa fa fa
0x0c3c7fff9f50: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3c7fff9f60: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3c7fff9f70: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3c7fff9f80: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3c7fff9f90: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
...
==13913==ABORTING
* src/make-prime-list.c (main): Bounds check the incremented index,
before using to access the buffer.
Fixes http://bugs.gnu.org/19784
* gl/lib/tempname.c.diff: Fix recent breakage so it applies again.
Invalid patch was noticed at http://hydra.nixos.org/eval/1172233
* cfg.mk: Exempt diff files from these "id_est" syntax checks.
(sc_ensure_gl_diffs_apply): A new syntax check, to ensure all
patches under gl/ apply cleanly. Note we use --fuzz=0 to check
patches apply cleanly for safety, due to the patch(1) issue detailed
in commit v8.21-117-g46f7e05
* gl/lib/regcomp.c.diff: Rediffed.
* gl/lib/regex_internal.c.diff: Likewise.
* gl/lib/regex_internal.h.diff: Likewise.
* gl/lib/regexec.c.diff: Likewise.
* gl/lib/tempname.h.diff: Likewise.
The following test fails on aarch64 on openSUSE's OpenBuildService
due to glibc's execvp reversing the pointers of 'environ', i.e.,
the output of "env|tac" equals "env env" on that platform.
* tests/misc/printenv.sh: Use 'env env' to work around the behavior
on that platform.
While at it, fix the grep pattern which suppressed all environment
variables starting with an underscore "_" instead of "$_" (and
"$LD_PRELOAD") only.
* src/md5sum.c (usage): Detail the reasons for the default
double space between checksum and file name.
* doc/coreutils.texi (md5sum invocation): Likewise.
Explicitly mention the 3 formats that --check supports.
Fixes http://bugs.gnu.org/19725
* m4/jm-macros.m4 (coreutils_MACROS): Check for syncfs().
* man/sync.x: Add references to syncfs, fsync and fdatasync.
* doc/coreutils.texi (sync invocation): Document the new feature.
* src/sync.c: Include "quote.h".
(AUTHORS): Include myself.
(MODE_FILE, MODE_DATA, MODE_FILE_SYSTEM, MODE_SYNC): New enum values.
(long_options): Define.
(sync_arg): New function.
(usage): Describe that arguments are now accepted.
(main): Add arguments parsing and add support for fsync(2),
fdatasync(2) and syncfs(2).
* tests/misc/sync.sh: New (and only) test for sync.
* tests/local.mk: Reference the new test.
* AUTHORS: Add myself to sync's authors.
* NEWS: Mention the new feature.
* scripts/autotools-install: Increase automake's version number
to 1.15 and add Stefano Lattarini's new GPG key ID.
Increase gettext's version to 0.19.4 and add Daiki Ueno's GPG key ID.
Also move VERSION definition "up" so that it is once again
automatically updated via the emacs hook snippet at the end
of the file.
* src/stty.c (usage): Don't reference unsupported options,
in the combined options descriptions.
* doc/coreutils.texi (stty invocation): Adjust for the
new order of the 'sane' and 'raw' combined options.
Also add -iutf8 to the 'sane' list.
* src/stty.c (usage): On systems that support this setting (BSD),
display 'status' in the list of adjustable special characters.
* doc/coreutils.texi (stty invocation): Mention the option, and that
it's not currently supported on Linux.
The equivalent of this is 'flush', but that was never documented
as an option (though was output with stty -a). Therefore use
the more descriptive name, also generally used on BSD systems.
Note even though this setting seems ineffective on Linux, supporting
the setting is useful to allow terminal programs to receive
the default ^O character code.
* doc/coreutils.texi (stty invocation): Document the 'discard' option.
* src/stty.c (struct control_info): Add 'discard'; same as 'flush'.
(display_all): Show 'discard' rather than 'flush' char.
(display_changed): Likewise.
(usage): Document the 'discard' option.
Add support for the "extproc" option which is well described at:
http://lists.gnu.org/archive/html/bug-readline/2011-01/msg00004.html
* src/stty.c (usage): Describe the extproc option if either the
Linux EXTPROC local option is defined, or the equivalent
BSD TIOCEXT ioctl is defined.
(main): Make the separate ioctl call for extproc on BSD.
* doc/coreutils.texi (stty invocation): Describe the option,
and reference the related RFC 1116.
* NEWS: Mention the new feature.
* tests/split/record-sep.sh: Use the recently added returns_ function
to simplify the shell syntax in this test. Also remove the redirection
of stdout/stderr to /dev/null as this eases analyzing errors.
* src/split.c (eolchar): A new variable to hold
the separator character (unibyte for now).
This is reference throughout rather than hardcoding '\n'.
(usage): Describe the new --separator option, and
mention records along with lines so there is no ambiguity
that all options treat lines and records equivalently.
(main): Have -t update eolchar, or default to '\n'.
* tests/split/record-sep.sh: New test case.
* tests/local.mk: Reference the new test.
* doc/coreutils.texi (split invocation): Document the new option.
Adjust --lines, --line-bytes, --number=[lr]/... to mention
they pertain to records if --separator is specified.
* NEWS: Mention the new feature.
Following on from http://bugs.gnu.org/17546
make it more obvious that du may elide specified operands
to avoid double counting in the set.
* src/du.c (usage): Specify that du operates on the set of
operands, rather than each independently.
* doc/coreutils.texi (du invocation): Likewise. Also state
that the number of entries printed may change due to the
order specified. Currently, deeper items specified earlier
will result in them being displayed, but don't mention that
implementation detail in the documentation.
* THANKS.in: Add reporter.
Reported by Stephen Shirley
When some program produces unexpected output, that use of
compare-vs-/dev/null will ensure that the surprising output is
printed in the test's output. With "test -s err" only, one
would have to instrument and rerun in order to see the offending
output.
* cfg.mk (sc_prohibit_and_fail_1): Exempt 'compare' from this check.
* tests/dd/misc.sh: Change "tests -s ... || fail=1" to
"compare /dev/null ... && fail=1".
* tests/misc/nice.sh: Likewise.
* tests/rm/read-only.sh: Likewise.
* tests/tail-2/inotify-race.sh: Likewise.
* tests/touch/no-dereference.sh: Likewise.
Suggested by Jim Meyering in
http://lists.gnu.org/archive/html/coreutils/2015-01/msg00042.html
Many tests use `program ... && fail=1` to ensure expected
error situations are indicated. However that would mask
an unexpected exit (like a crash). Therefore explicitly
check the expected exit code.
Note where error messages are also verified, the extra
protection is not added.
* tests/init.sh (returns_): A new helper function to
check the return code of a command, and used
throughout the tests.
* cfg.mk (sc_prohibit_and_fail_1): Add a syntax check
to avoid new instances of this issue.
* tests/df/no-mtab-status.sh: Provide libmount placeholders,
to avoid skipping the test when libmount is in use.
* tests/df/skip-duplicates.sh: Likewise.
* tests/df/skip-rootfs.sh: Comment that the test is moot
when libmount (/proc/self/mountinfo) is being used.
Problem reported by Daiki Ueno in: http://bugs.gnu.org/19520
* src/shuf.c (main): Avoid core dump if !input_range.
* tests/misc/shuf.sh: Test for this bug.
* bootstrap: Update copyright year manually (missing in previous
gnulib update).
* tests/init.sh: Likewise.
The entries in the exemption list are processed by
"grep -vEf ./.x-update-copyright", and therefore evaluated as an
extended regular expression (ERE). Thus, the "bootstrap" entry
also matched for bootstrap.conf which we want to be updated.
* .x-update-copyright: Change all entries to EREs, i.e. including
the caret ^ and dollar sign $ meta-characters matching the beginning
and the end of a line.
* bootstrap.conf: Update copyright year by "make update-copyright".
Finally, the only one showing up with the following command should
be the COPYING file:
$ git grep 'Copyright .* Free Software' | grep -v '2015 Free Software'
* src/split.c (usage): Indent the info on CHUNKS so that
help2man can match it and align appropriately in its own section.
Fixes http://bugs.gnu.org/19228
Pick up an errno adjustment in xstrtol() that fixes
a spurious test failure on Darwin 14.0.0.
Also update copyright year to 2015 avoiding a syntax-check failure.
Run "make update-copyright" and then...
* tests/sample-test: Adjust to use the single most recent year.
* tests/du/bind-mount-dir-cycle-v2.sh: Fix case in copyright message,
so that year is updated automatically in future.
Commit v8.23-63-g111a2b9 removed the expensive tag on this test,
as it runs quickly on systems with inotify. However without that
it would take about 8 minutes for the test to complete all iterations.
* tests/tail-2/inotify-rotate.sh: Tag as expensive without inotify.
Also adjust the polling parameters used on systems without inotify
so that the test completes within about 15 seconds.
Included in this are gnulib changes 3ea43e02 2768ceb7
which make the device IDs from /proc/self/mountinfo
available to df. This can be leveraged by a subsequent
change to df to present a more accurate list of file systems.
* bootstrap: Merge from gnulib.
* src/ls.c (dev_ino_pop): s/obstack_blank/obstack_blank_fast/
as this API/ABI has changed, giving memory exhausted errors
if negative (large positive) numbers are passed to obstack_blank().
* tests/df/skip-duplicates.sh: Adjust as the new gnulib code
requires a non NULL mnt_opts even when mnt_type is not "none".
http://hydra.nixos.org/build/18129583 identified (on OS X)
an incorrect test assumption in the previous commit.
* gl/lib/xdectoint.c (__xnumtoint): Suppress the EINVAL
error message as it's redundant in this context.
* tests/misc/tail.pl: Suppress _optionally_ appended
strerror messages.
* tests/fmt/base.pl: Likewise.
* tests/pr/pr-tests.pl: Likewise.
* tests/split/l-chunk.sh: Likewise.
Following on from commit v8.23-82-gaddae94, consistently diagnose
numbers that are too large, so as to distinguish from other errors,
and make the limits obvious.
* gl/modules/xdectoint: A new module implementing xdecto[iu]max(),
which handles the common case of parsing a bounded integer and
exiting with a diagnostic on error.
* gl/lib/xdectoimax.c: The signed variant.
* gl/lib/xdectoint.c: The parameterized implementation.
* gl/lib/xdectoint.h: The interface.
* gl/lib/xdectoumax.c: The unsigned variant.
* bootstrap.conf: Reference the new module.
* cfg.mk (exclude_file_name_regexp--sc_require_config_h_first):
Exclude the parameterized templates.
* src/csplit.c: Output EOVERFLOW or ERANGE errors if appropriate.
* src/fmt.c: Likewise.
* src/fold.c: Likewise.
* src/head.c: Likewise.
* src/ls.c: Likewise.
* src/nl.c: Likewise.
* src/nproc.c: Likewise.
* src/shred.c: Likewise.
* src/shuf.c: Likewise.
* src/stdbuf.c: Likewise.
* src/stty.c: Likewise.
* src/tail.c: Likewise.
* src/truncate.c: Likewise.
* src/split.c: Likewise.
* src/pr.c: Likewise.
* tests/pr/pr-tests.pl: Adjust to avoid matching errno diagnostic.
* tests/fmt/base.pl: Likewise.
* tests/split/l-chunk.sh: Likewise.
* tests/misc/shred-negative.sh: Likewise.
* tests/misc/tail.pl: Likewise. Also remove the redundant
existing ERR_SUBST from test err-6.
* tests/ls/hex-option.sh: Check HEX/OCT options.
* tests/misc/shred-size.sh: Likewise.
* tests/misc/stty-row-col.sh: Likewise.
OS/2 traditional shells(cmd) do not expand a response file(@file)
or a wildcard. Expand them in each utility itself.
* src/system.h (initialize_main): Define on OS/2. Expand a response
file and a wildcard.
* THANKS.in: Change the comment at the top to send change requests
regarding this file to the main mailing list rather than referring
to cp's --help output for the mailing list's address - which does
not include that information anymore.
glibc <= 2.5 would crash when passed invalid long double values,
therefore internal gnulib routines were used, essentially only by od,
to output such invalid values. Later glibc versions don't crash,
as per https://sourceware.org/bugzilla/show_bug.cgi?id=4586
and subsequently od was adjusted to use the system printf routines
through the use of the ftoastr module with commit v8.7-22-ga71c22f.
Consequently our testing of this feature was moot, and use of
the gnulib printf replacement for printf(1), od(1) and error(3) etc.
was redundant.
* configure.ac (gl_printf_safe): Unset so that we don't check that
"nan" is output for these long double values.
* tests/misc/od-float.sh: Adjust all existing checks to fail if od
exits with failure status (like crashing for example). Add a new case
for one of the problematic invalid long double values for x86_64.
We only check that od exits successfully at present, which may change
if https://sourceware.org/bugzilla/show_bug.cgi?id=17661 is resolved.
* gl/lib/rand-isaac.c (isaac_refill): readisaac() purposefully passes
unaligned pointers to avoid memory copies. This is only done on
platforms where this is defined, so avoid the associated
runtime warning generated with -fsanitize=undefined, which is:
lib/rand-isaac.c:125:182: runtime error: store to misaligned address
0x63100003d7fd for type 'isaac_word', which requires 8 byte alignment
0x63100003d7fd: note: pointer points here
47 ce ed a4 be be be 00 00 00 00 00 00 00 00 ...
^
Prompted by the implicit -O3 added by american-fuzzy-lop,
seen with GCC 4.9.2 on x86_64.
src/pr.c: In function 'print_files.part.5':
src/pr.c:1781:6: error: assuming signed overflow does not occur
when simplifying conditional to constant [-Werror=strict-overflow]
if (cols_ready_to_print () == 0)
This happens because cols_ready_to_print() is inlined
thus reducing the comparison to the N variable in print_page().
Now this can't overflow due to the protection when parsing the
specified column, but use an unsigned type to avoid the
apparent signed overflow.
* src/pr.c (cols_ready_to_print): Increment an unsigned type to
avoid the subsequent signed overflow warning.
This patch fixes the handling of sub-bind-mount cycles which are
incorrectly detected as the file system errors. If you bind mount the
directory 'a' to its subdirectory 'a/b/c' and then run 'du a/b' you
will get the circular dependency warning even though nothing is wrong
with the file system. This happens because the first directory that is
traversed twice in this case is not a bind mount but a child of bind
mount. The solution is to traverse all the directories in the cycle
that fts detected and check whether they are not a (bind) mount.
* src/du.c (mount_point_in_fts_cycle): New function that checks whether
any of the directories in the cycle that fts detected is a mount point.
* src/du.c (process_file): Update the function to use the new function
that looks up all the directories in the fts cycle instead of only the
last one.
* tests/du/bind-mount-dir-cycle-v2.sh: New test case that exhibits the
described behavior.
* tests/local.mk: Reference the new root test.
* NEWS: Mention the bug fix.
These checks weren't correctly avoided in commit v8.23-66-g222d7ac
* tests/cp/same-file.sh: Avoid all hardlink to symlink tests
on platforms where that's not supported.
Identified by http://hydra.nixos.org/build/17636446
"zu" was output on solaris 8 for example rather than the number,
since coreutils-8.22.
* cfg.mk: Disallow %z, since we don't currently use the gnulib
fprintf module, so any usage with it is non portable. Also
our usage with error() currently works only through an ancillary
dependency on the vfprintf gnulib module.
* src/rm.c (main): Use %PRIuMAX rather than %zu for portability.
* src/dd.c (alloc_[io]buf): Likewise for consistency.
* src/od.c (main): Likewise.
* src/split.c (set_suffix_length): Likewise.
* NEWS: Mention the rm bug fix.
Reported in http://bugs.gnu.org/19184
Solaris 8 was seen to issue this error:
"printf: `&': illegal format character"
* test/dd/ascii.sh: Use the coreutils printf in this test
rather than the system one, to avoid portability issues.
If '\n' was present at the size_t boundary of a file,
then that and subsequent data would be discarded.
* src/paste.c (paste_parallel): Avoid the overflow issue
by changing the flag to a boolean rather than a count.
* NEWS: Mention the bug fix.
* src/df.c (filter_mount_list): Separate remote locations are
generally explicitly mounted, so list each even if they share
the same remote device and thus storage. However with --total
keep the suppression to give a more accurate value for the
total storage available.
(usage): Expand on the new implications of --total and move
it in the options list according to alphabetic order.
doc/coreutils.texi (df invocation): Mention that --total impacts
on deduplication of remote file systems and also move location
according to alphabetic order.
* tests/df/skip-duplicates.sh: Add remote test cases.
* NEWS: Mention the change in behavior.
Reported in http://bugs.debian.org/737399
Reported in http://bugzilla.redhat.com/920806
Reported in http://bugzilla.opensuse.org/866010
Reported in http://bugzilla.opensuse.org/901905
commit v8.22-125-g9d736f8 printed placeholder "-" values
for device names that didn't match the preferred device name
for a particular mount point. However that was seen to erroneously
suppress values for aliased host names or exports, common with
remote file systems.
* src/df.c (me_for_dev): Rename from devname_for_dev() so that
we can determine the remoteness as well as the name for the
preferred mount entry.
(get_dev): Don't output place holder values when both
current and preferred mount entries are remote.
Reported in http://bugs.debian.org/737399
* NEWS: Update the recent entry to also mention the avoidance
of incorrectly unlinking a multi-hardlinked "source" file when
presented with source and dest that only differ in case.
* src/copy.c (same_file_ok): Mention the case issue with same_name().
* tests/mv/hardlink-case.sh: Test the issue on HFS+.
* tests/local.mk: Reference the new test case.
* tests/mv/vfat: Remove an old related but unused test case.
file_t is now mapped to unlabeled_t as per:
http://danwalsh.livejournal.com/68189.html
Therefore use the latter to ensure we match correctly.
This is needed on >= Fedora 21 for example,
while it also works on earlier releases.
We may run into a race condition if we treat hard links to the same file
as distinct files. If we do 'mv a b' and 'mv b a' in parallel, both a
and b can disappear from the file system. The reason is that in this
case the unlink on src is called and the system calls can end up being
run in the order where unlink(a) and unlink(b) are the last two system
calls. Therefore exit with an error code so that we avoid the potential
data loss.
* src/copy.c (same_file_ok): Don't set unlink_src that was used by mv,
and return false for two hardlinks to a file in move_mode.
*src/copy.c (copy_internal): No longer honor the unlink_src option,
used only by mv.
NEWS: Mention the change in behavior.
* tests/cp/same-file.sh: Augment to cover the `cp -a hlsl1 sl1` case.
* tests/mv/hard-verbose.sh: Remove no longer needed test.
* tests/local.mk: Remove the reference to hard-verbose.sh.
* tests/mv/hard-4.sh: Adjust so we fail in this case.
* tests/mv/i-4.sh: Likewise.
* tests/mv/symlink-onto-hardlink-to-self.sh: Likewise.
* tests/tail-2/inotify-rotate.sh: Use retry_delay_
to employ an exponential backoff with a total delay of
up to 25.5s. The 15s delay was seen to trigger a false
failure in http://hydra.nixos.org/build/16546517
Also remove the .1s sleep in each of the 50 iterations
to reduce the running time of the test and thus the
expensive_ tag on this test was removed.
Also ensure that we use the standard exit procedure
upon failure to avoid any erroneous diagnostics due
to persistent files on NFS.
* src/df.c (usage): Mention that duplicate file systems are shown
with this option, not just dummy file systems.
* doc/coreutils.texi (df invocation): For the --all option, expand
on the class of normally suppressed mount entries that it includes.
Reported in http://bugs.debian.org/737399
sc_long_lines was the slowest syntax check
before$ time make sc_long_lines
long_lines
real 0m2.740s
after $ time make sc_long_lines
long_lines
real 0m0.677s
* src/cfg.mk (sc_dd_max_sym_length): s/--max-line-length/-L/
for compat with BSDs.
(sc_long_lines): Prefilter with wc -L to only identify lines
in files that have lines longer than 80 characters.
* tests/d_type-check: The hardcoded name doesn't hold true for all
Linux/glibc platforms, let alone Linux/non-glibc.
Use ctypes.util.find_library() instead to search for the library.
At least the MHz number in /proc/cpuinfo may change, thus leading to
a false positive failure when comparing the expected against the
actual output file. Use an invariant file instead: /proc/version.
* tests/misc/head-c.sh: s/cpuinfo/version/
* src/chroot.c (is_root): Adjust to compare canonicalized paths
rather than inodes, to handle (return false in) the case where
we have a tree that is constructed by first bind mounting "/"
(thus having the same inode).
(main): Unconditionally call chroot() because it's safer
and of minimal performance benefit to avoid in this case.
This will cause inconsistency with some platforms
not allowing `chroot / true` for non root users.
* tests/misc/chroot-fail.sh: Adjust appropriately.
* NEWS: Mention the bug fixes.
Fixes http://bugs.gnu.org/18736
With --sparse=always use fallocate(...PUNCH_HOLE...) to
avoid any permanent allocation due to speculative
preallocation employed by file systems such as XFS.
* m4/jm-macros.m4: Check for <linux/falloc.h> and fallocate().
* src/copy.c (punch_hole): A new function to try and punch
a hole at the specified offset if supported.
(create_hole): Call punch_hole() after requesting a hole.
(extent_copy): Likewise.
* NEWS: Mention the improvement.
Previously cp would not detect runs of NULs that were
smaller than the buffer size used for I/O (currently 128KiB).
* src/copy.c (copy_reg): Use an independent hole_size, set to
st_blksize, to increase the chances of detecting a representable hole,
in a run of NULs read from the input.
(create_hole): A new function refactored from sparse_copy() and
extent_copy() so we have a single place to handle holes.
(sparse_copy): Adjust to loop over the larger input buffer
in chunks of the passed hole size. Also adjust to only call
lseek once per hole, rather than at least once per input buffer.
* tests/cp/sparse.sh: Add test cases for various sparse chunk sizes.
* NEWS: Mention the improvement.
Prompted by http://hydra.nixos.org/build/15682577
with GCC 4.8.3 on i686
src/tac.c:557:6: error: assuming signed overflow does not occur
when simplifying conditional to constant [-Werror=strict-overflow]
if (bytes_copied < 0)
This happens because copy_to_temp() is inlined in tac_nonseekable(),
thus reducing the comparison to the bytes_copied variable in
copy_to_temp. Now this can't overflow on either 32 or 64 bit
due to the protection of the preceding fwrite(). We could use a
guard like "if (bytes_copied <= OFF_T_MAX - bytes_read)" to avoid
the warning, but rather than a runtime branch, just use an unsigned
type to avoid apparent signed overflow on systems where the accumulation
is not promoted to unsigned (32 bit size_t, 64 bit off_t).
* src/tac.c (copy_to_temp): Increment an unsigned type to
avoid the subsequent signed overflow warning.
Fix similar problems in head, od, split, tac, and tail.
Reported by George Shuklin in: http://bugs.gnu.org/18621
* NEWS: Document this.
* src/head.c (elseek): Move up.
(elide_tail_bytes_pipe, elide_tail_lines_pipe): New arg
CURRENT_POS. All uses changed.
(elide_tail_bytes_file, elide_tail_lines_file):
New arg ST and remove arg SIZE. All uses changed.
* src/head.c (elide_tail_bytes_file):
* src/od.c (skip): Avoid optimization for /sys files, where
st_size is bogus and st_size == st_blksize.
Don't report error at EOF when not optimizing.
* src/head.c, src/od.c, src/tail.c: Include "stat-size.h".
* src/split.c (input_file_size): New function.
(bytes_split, lines_chunk_split, bytes_chunk_extract): New arg
INITIAL_READ. All uses changed. Use it to double-check st_size.
* src/tac.c (tac_seekable): New arg FILE_POS. All uses changed.
(copy_to_temp): Return size of temp file. All uses changed.
* src/tac.c (tac_seekable):
* src/tail.c (tail_bytes):
* src/wc.c (wc):
Don't trust st_size; double-check by reading.
* src/wc.c (wc): New arg CURRENT_POS. All uses changed.
* tests/local.mk (all_tests): Add tests/misc/wc-proc.sh,
tests/misc/od-j.sh, tests/tail-2/tail-c.sh.
* tests/misc/head-c.sh:
* tests/misc/tac-2-nonseekable.sh:
* tests/split/b-chunk.sh:
Add tests for problems with /proc and /sys files.
* tests/misc/od-j.sh, tests/misc/wc-proc.sh, tests/tail-2/tail-c.sh:
New files.
* doc/coreutils.texi (stat invocation): Add a paragraph documenting
stat's output format when the --terse option is specified, both in
normal and in --file-system mode.
Reported by Dan Jacobson <jidanni@jidanni.org>
in http://bugs.gnu.org/18624
* init.cfg (gcc_shared_): -ldl has to be positioned after the object
files that may rely upon it. This fixes tests/cp/nfs-removal-race.sh
which references dlsym() from libdl.
* src/dd.c: Report the transfer progress every second when the
new status=progress level is used. Adjust the handling and
description of the status= option so that they're treated as
mutually exclusive levels, rather than flags with implicit precedence.
* doc/coreutils.texi (dd invocation): Document the new progress
status level. Reference the new level in the description of SIGUSR1.
* tests/dd/stats.sh: Add new test for status=progress.
* tests/dd/misc.sh: Change so status=none only takes precedence
if it's the last level specified.
* NEWS: Mention the feature.
* src/dd.c (ifd_reopen): A new wrapper to ensure we
don't exit upon receiving a SIGUSR1 in a blocking open()
on a fifo for example.
(iftruncate): Likewise for ftruncate().
(iread): Process signals also after a short read.
(install_signal_handlers): Install SIGINFO/SIGUSR1 handler
even if set to SIG_IGN, as this is what the parent can easily
set from a shell script that can send SIGUSR1 without the
possiblity of inadvertently killing the dd process.
* doc/coreutils.texi (dd invocation): Improve the example to
show robust usage wrt signal races and short reads.
* tests/dd/stats.sh: A new test for various signal races.
* tests/local.mk: Reference the new test.
* NEWS: Mention the fix.
On some filesystems (BTRFS), moving a file within the filesystem may
cross subvolume boundaries and we can use a lightweight reflink copy,
similar to what cp(1) can do, which is faster than a full file copy.
This is enabled by default because it's only an optimization for
the fall back copy and does not break user expectations or usability.
* src/mv.c (cp_option_init): Set the reflink mode to AUTO.
* NEWS: Mention the improvement.
* src/stty.c (usage): Exclude unsupported options from --help,
which for example impacts the "dsusp" and "cdtrdsr" options on Linux.
Fixes http://bugs.gnu.org/18506
"E.g." stands for latin "exempli gratia" which is typically read
as "for example". "E.g." does not stand for the word "example".
As such, "for e.g." might be read as "for for example".
Fix this usage by simply replacing "e.g." with "example".
* man/local.mk (.x.1): Move the program name argument down after
the last option argument when calling $(run_help2man).
While the other way would be accepted for the GNU help2man program,
it is not for the 'dummy-man' script (called as a fallback on
systems lacking perl).
The wrong order was introduced in commit v8.21-119-gb3578fc while
adding the --info-page option.
* man/dummy-man: Fix argument count check, now only permitting
exactly 1 argument, the program name.
Reported by Andreas Schwab <schwab@linux-m68k.org>
* .gitignore: Remove reference to no longer generated make file.
* configure.ac: Don't bother generating placeholder make file.
* man/local.mk: Hardcode the man page deps list for normal builds
to be compatible with all make implementations and configure options.
Note in SINGLE_BINARY mode, all man pages will be generated on
any change to the coreutils binary, but development will generally
not be done in this mode, so this shouldn't be an issue.
Fixes http://bugs.gnu.org/18055
Following on from commit v5.92-729-g130dd06, also avoid
the erroneous directory hardlink warning with -H.
* src/copy.c (copy_internal): Also handle the -H case
for command line arguments.
* tests/cp/duplicate-sources.sh: Augment the test case.
* NEWS: Augment the news entry.
* src/copy.c (copy_internal): Handle the case where we have the
same destination directory as already encountered, which can only
be due to the corresponding source directory being specified multiple
times.
* tests/cp/duplicate-sources.sh: Add a test for the new multiply
specified directory case, and the existing multiply specified file case.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug fix.
* src/system.h (emit_ancillary_info): Take the invariant PROGRAM_NAME
as a parameter, so that consistent references are made to online docs
and texinfo nodes, when a --program-prefix is in place. Note the
man pages don't need this fix as they're generated before the program
prefix is used.
* NEWS: Mention the improvements in references to online documentation.
* src/system.h (emit_ancillary_info): For commands that don't have
a 1:1 mapping with the texinfo node names, provide a mapping to
the correct node.
* doc/coreutils.texi: Add some extra cross references noticed while
checking this.
Fixes http://bugs.debian.org/762092
On XFS, when creating the ~2G test file 'big' in a for-loop by
appending 20M each time, the file ends up using ~4G - visible in
'st_blocks'. The unused space would be reclaimed later.
This feature is called "speculative preallocation" which aims at
avoiding fragmentation.
According to the XFS FAQ [1], there are two particular aspects of
XFS speculative preallocation that are triggering this:
1. "Applications that repeatedly trigger preallocation and reclaim
cycles [after file close] can cause fragmentation.
Therefore, this pattern is detected and causes the preallocation
to persist beyond the lifecycle of the file descriptor."
2. "Preallocation sizes grow as files grow larger."
[1] http://xfs.org/index.php/XFS_FAQ
Avoid one of the above by only doing a single close (reclaim cycle).
* tests/du/2g.sh: Similar to the fix for a dd test (see commit
v8.22-65-g7c03fe2), avoid speculative preallocation by creating
the 'big' file in one go instead of appending to it in the loop.
Remove debugging statements as the output with 'set -x' is
sufficient nowadays.
Problem reported by Vincent Lefevre in: http://bugs.gnu.org/18449
* src/cat.c (main): Allow copying an empty file to itself.
* tests/misc/cat-self.sh: New test.
* tests/local.mk (all_tests): Add it.
* src/system.h (emit_ancillary_info): Add a direct reference
to the corresponding online info documentation. Corresponding
redirects were put in place on www.gnu.org to allow for concise links.
* help2man: Adjust to add the "online help" link (and subsequent
translation bugs link) to a "REPORTING BUGS" section.
Also add the concise links for further information in --help
to the "SEE ALSO" section, and dispense with the more verbose
default for that.
old form: coreutils '$cmd invocation'
new form: '(coreutils) $cmd invocation'
The old form erroneously referenced the node for the 'coreutils'
multi-call program. Now that problematic node name was renamed
in commit v8.23-18-g72e470b, but the newer less ambiguous form
also has the advantage of working with the pinfo viewer for example.
Full discussion at http://bugs.gnu.org/18428
* man/local.mk: Adjust man page references to texinfo nodes.
* src/system.h: Adjust --help references to texinfo nodes.
* src/local.mk (transform): commit v8.23-22-g6f9b018 discarded all
transformations on the libstdbuf.so name. Be more conservative and
only exclude the $(program_transform_name) portion for libstdbuf.
* src/local.mk (transform): Skip the transformation for libstdbuf
since that should not be subject to name clashes, and we need
to reference the name directly in LD_PRELOAD etc.
* configure.ac: Add a comment on the coupling of pkglibexec_PROGRAMS
to $(transform).
Issue reported at https://trac.macports.org/ticket/44922
Improved by Nick Bowler
The C standard says this isn't portable, if you include
standard include files.
* build-aux/gen-single-binary.sh:
* src/coreutils-arch.c (single_binary_main_arch)
(single_binary_main_uname):
* src/coreutils-dir.c (single_binary_main_ls)
(_single_binary_main_dir):
* src/coreutils-vdir.c (single_binary_main_ls)
(_single_binary_main_vdir):
* src/coreutils.c (SINGLE_BINARY_PROGRAM):
Remove leading _ from single_binary prefix.
* src/numfmt.c (round_style): Rename from _round. All uses changed.
(inval_style): Rename from _invalid. All uses changed.
This supports longstanding shell commands like
'info coreutils "touch invocation"'.
Problem reported by Vincent Lefevre via Bob Proulx in:
http://bugs.gnu.org/18428
* doc/coreutils.texi (Multi-call invocation):
Rename from "coreutils invocation".
* src/extent-scan.c (extent_scan_read): Following on from the flags size
adjustment in commit v8.23-13-g1505b37, verify that the internal
representation of the flags is never truncated which could happen in the
unlikely case on 32 bit if the kernel flags ever expanded to 64 bits
which is theoretically possible given the reserved space.
C11 doesn't require them, even POSIX doesn't strictly require the
64-bit versions, and it makes the code a bit clearer if they're
used only when needed.
* src/copy.c (write_zeros, extent_copy):
* src/extent-scan.h (struct extent_info.ext_length):
Use off_t, not uint64_t, for a value derived from a file offset.
* src/extent-scan.h (struct extent_info.ext_flags)
Prefer plain unsigned int to uint32_t where either will do.
(struct extent_scan.ei_count):
Use size_t, not uint32_t, for a value bounded by SIZE_MAX.
* src/factor.c (MAGIC64, MAGIC63, MAGIC65):
Remove unnecessary casts to uint64_t.
* doc/coreutils.texi (df invocation): Add a sentence that eliding
duplicate entries for the same file system is not limited to bind
mounts, but also happens for remote file systems like NFS.
v8.23 has a test failure on Fedora rawhide build servers
in tests/df/skip-duplicate.sh. This was due to no '/'
entry being output by df. That was due to an inaccurate
/proc/mounts on the build environment as stat(/mnt/point)
identified all these /proc/mounts entries as having the
same device id:
/ rootfs
/ /dev/md1
/dev devtmpfs
/run tmpfs
/boot /dev/md0
/proc/filesystems /dev/md1
Since the device name on the right changes for a given id,
that causes the entries to be continually replaced, thus
resulting in no '/' entry. I'm guessing this is due to
the mock environment bind mounting unneeded or sensitive
items to a dummy file on the host / (/dev/md1) though
have not looked into those details.
So rather than relying on an accurate /proc/mounts,
the attached patch takes a more conservative replacement
approach and only swaps a new device entry when the
mount point matches. That should handle all practical
cases while also avoiding this situation.
* src/df.c (filter_mount_list): Only replace entries with
different device names when the mount point also matches.
If the hash structures grow sufficiently large so that
the system is actively swapping, then the deallocation
can take a significant amount of time. Details at:
http://lists.gnu.org/archive/html/coreutils/2014-08/msg00012.html
* src/cp.c (main): Only call hash deallocation routines
when in lint checking mode.
* THANKS.in: Remove as now in the git author list.
Since commit v8.22-94-g99960ee, chroot(1) skips the chroot(2) syscall
for "/" arguments (and synonyms). The problem is that it also skips
the following chdir("/") call in that case. The latter breaks existing
scripts which expect "/" to be the working directory inside the chroot.
While the first part of the change - i.e., skipping chroot("/") - is
okay for consistency with systems where it might succeed for a non-root
user, the second part might be malicious, e.g.
cd /home/user && chroot '/' bin/foo
In the "best" case, chroot(1) could not execute 'bin/foo' with ENOENT,
but in the worst case, chroot(1) would execute '/home/user/bin/foo' in
the case that exists - instead of '/bin/foo'.
Revert that second part of the patch, i.e., perform the chdir("/)
in the common case again - unless the new --skip-chdir option is
specified. Restrict this new option to the case of "/" arguments.
* src/chroot.c (SKIP_CHDIR): Add enum.
(long_opts): Add entry for the new --skip-chdir option.
(usage): Add --skip-chdir option, and while at it, move the other
to options into alphabetical order.
(main): Accept the above new option, allowing it only in the case
when NEWROOT is the old "/".
Move down the chdir() call after the if-clause to ensure it is
run in any case - unless --skip-chdir is specified.
Add a 'newroot' variable for the new root directory as it is used
in a couple of places now.
* tests/misc/chroot-fail.sh: Invert the last tests which check the
working directory of the execvp()ed program when a "/"-like
argument was passed: now expect it to be "/" - unless --skip-chdir
is given.
* doc/coreutils.texi (chroot invocation): Document the new option.
Document that chroot(1) usually calls chdir("/") unless the new
--skip-chdir option is specified. Sort options.
* NEWS (Changes in behavior): Mention the fix.
(New features): Mention the new option.
* init.cfg (nonroot_has_perm_): Add chroot's new --skip-chdir option.
* tests/cp/preserve-gid.sh (t1): Likewise.
* tests/cp/special-bits.sh: Likewise.
* tests/id/setgid.sh: Likewise.
* tests/misc/truncate-owned-by-other.sh: Likewise.
* tests/mv/sticky-to-xpart.sh: Likewise.
* tests/rm/fail-2eperm.sh: Likewise.
* tests/rm/no-give-up.sh: Likewise.
* tests/touch/now-owned-by-other.sh: Likewise.
Reported by Andreas Schwab in http://bugs.gnu.org/18062
* configure.ac: Don't add stdbuf to the list of programs to build
if EXEEXT is set, as that is not handled in configure.ac for
libstdbuf.so yet (see bin_PRGRAMS handling in configure.ac).
Also the LD_PRELOAD mechanism will need to be adjusted to support
cygwin in any case, so avoid stdbuf completely in this case for now.
Problem reported by Eric Blake.
Problem reported by Sebastian Rasmussen in: http://bugs.gnu.org/18054
* gl/lib/randread.c (randread_error): Don't put multiple string
literals inside _(...), as xgettext doesn't support that.
* src/chroot.c (main): In diagnostics, don't bother to distinguish
between setting the number of supplemental group IDs to a zero or
to a nonzero value, as the underlying system call is the same
either way. This also makes the string easier to translate correctly.
* tests/misc/env.sh: Skip if we can't execute the generated shebang,
which would be the case if there are spaces in the directory hierarchy.
This is triggered by `make distcheck`
This issue was identified by the manifest comparisons
done by `make distcheck`
* src/local.mk (noinst_HEADERS): Remove coreutils.h from this always
distributed list.
(nodist_src_coreutils_SOURCES): Add coreutils.h as its contents
are determined at configure time, so pointless to distribute.
(src_coreutils_SOURCES): Define explicitly so that the corresponding
nodist_ variable is honored.
(DISTCLEANFILES): Add coreutils.h to this rather than CLEANFILES,
as its contents are determined at configure time.
With libselinux-2.2.1-6.fc20.x86_64, kernel-3.12.6-300.fc20.x86_64
`cp --preserve=context src dst` was seen to succeed when src and
dst where on the same fixed context file system, as lsetfilecon()
returned success in this case when the context wasn't being changed.
* tests/cp/cp-a-selinux.sh: Copy from a different file system to
most likely have a different context that will test context
setting logic correctly.
This fixes a problem with native Solaris 'make', which does not
grok '-include' lines (a GNU extension to POSIX 'make').
* configure.ac (man/dynamic-deps.mk): Create it, with an old
time stamp, if doing dynamic dependency tracking.
* man/local.mk (DISTCLEANFILES): Put man/dynamic-deps.mk here,
rather than in CLEANFILES.
(man/dynamic-deps.mk): Don't create it read-only, so that we
can easily touch it later.
Include it with '@AMDEP_TRUE@@am__include@', not with '-include',
as '-include' does not work with native Solaris 'make'.
* src/numfmt.c (simple_strtod_int): Replace isdigit() with c_isdigit()
to avoid locale concerns and -Wchar-subscripts warnings on cygwin.
Remove the now redundant locale guard.
(simple_strtod_human): Cast characters to unsigned so that the promoted
int value passed to isblank() is positive, allowing it to work correctly
for all characters in unibyte locales. Previously character 0xA0,
i.e. non-breaking space, would be misclassified for example.
(process_suffixed_number): Likewise.
(skip_fields): Likewise.
Both issues were triggered by the -Wchar-subscripts warning on GCC 4.8.3
on cygwin, due to the is*() implementations used there, but the issue
is present on all platforms defaulting to signed chars.
* NEWS: Mention the bug fix.
Reported by Eric Blake
* tests/dd/ascii.sh: Quote so that '\\' is passed
to printf rather than a single '\', as that's not portable.
bash, dash, zsh and external solaris printf were seen to support
printf '\%03o' 1 2
while ksh, freebsh shell and external GNU printf need the more portable
printf '\\%03o' 1 2
Note we don't use env here to call the coreutils printf implementation,
as there are many printf calls, so relying on portable shell
implementations will be faster.
* tests/split/b-chunk.sh: Never show the rm prompt which would
hang the test suite. This was seen when split erroneously
created files with no persmissions, which was triggered by
this compiler bug in clang 3.4:
http://llvm.org/bugs/show_bug.cgi?id=18346
* gnulib: Sync recent cleanups and the fix for
missing df entries in the presence of bind mounts:
http://bugs.gnu.org/17833
* NEWS: Detail the df bug fix.
This didn't seem to cause any invalid operation on GNU/Linux at least,
but depending on the implementation, mutex deadlocks could occur.
For example this might be the cause of lockups seen on Solaris:
http://lists.gnu.org/archive/html/coreutils/2013-03/msg00048.html
This was identified with valgrind 3.9.0 with this setup:
seq 200000 > file.sort
valgrind --tool=drd src/sort file.sort -o file.sort
With that, valgrind would _intermittently_ report the following:
Destroying locked mutex: mutex 0x5419548, recursion count 1, owner 2.
at 0x4C2E3F0: pthread_mutex_destroy(in vgpreload_drd-amd64-linux.so)
by 0x409FA2: sortlines (sort.c:3649)
by 0x409E26: sortlines (sort.c:3621)
by 0x40AA9E: sort (sort.c:3955)
by 0x40C5D9: main (sort.c:4739)
mutex 0x5419548 was first observed at:
at 0x4C2DE82: pthread_mutex_init(in vgpreload_drd-amd64-linux.so)
by 0x409266: init_node (sort.c:3276)
by 0x4092F4: init_node (sort.c:3286)
by 0x4090DD: merge_tree_init (sort.c:3234)
by 0x40AA5A: sort (sort.c:3951)
by 0x40C5D9: main (sort.c:4739)
Thread 2:
The object at address 0x5419548 is not a mutex.
at 0x4C2F4A4: pthread_mutex_unlock(in vgpreload_drd-amd64-linux.so)
by 0x4093CA: unlock_node (sort.c:3323)
by 0x409C85: merge_loop (sort.c:3531)
by 0x409F8F: sortlines (sort.c:3644)
by 0x409CE3: sortlines_thread (sort.c:3574)
by 0x4E44F32: start_thread (in /usr/lib64/libpthread-2.18.so)
by 0x514EEAC: clone (in /usr/lib64/libc-2.18.so)
* src/sort.c (sortlines): Move pthread_mutex_destroy() out to
merge_tree_destroy(), so that we don't overlap mutex destruction
with threads still operating on the nodes.
(sort): Call the destructors only with "lint" defined, as the
memory used will be deallocated implicitly at process end.
* NEWS: Mention the bug fix.
Neither issue impacts on the correct operation of sort.
The issues were detected by both valgrind 3.8.1 and 3.9.0 using:
seq 200000 > file.sort
valgrind --tool=drd src/sort file.sort -o file.sort
For tool usage and error details see:
http://valgrind.org/docs/manual/drd-manual.html
* src/sort.c (queue_insert): Unlock mutex _after_ signalling the
associated condition variable. Valgrind flags this with:
"Probably a race condition: condition variable 0xffeffffb0 has been
signaled but the associated mutex 0xffeffff88 is not locked by the
signalling thread."
The explanation at the above URL is:
"Sending a signal to a condition variable while no lock is held on
the mutex associated with the condition variable. This is a common
programming error which can cause subtle race conditions and
unpredictable behavior."
This should at least give more defined scheduling behavior.
(merge_tree_destroy): Make symmetrical with merge_tree_init() thus
destroying the correct mutex. Valgrind flags this with:
"The object at address 0x5476cf8 is not a mutex."
* man/local.mk (man/dynamic-deps.mk): Use the same code to
derive FOO from man/FOO.1 as in the .x.1 rule below.
Using the more concise "name=$${man:4: -2}" is not portable enough.
Add the --enable-single-binary option to the configure file.
When enabled, this option builds a single binary file containing
the selected tools. Which tool gets executed depends on the value
of argv[0] which can be set implicitly through symlinks to the
single program.
This setup reduces significantly the size of a complete coreutils
install, since code from lib/libcoreutils.a is not duplicated in
every one of the more than 100 binaries. Runtime overhead is
increased due to more dynamic libraries being loaded, and extra
initialization being performed for all utils. Also initially
a larger binary is loaded from storage, though this is usually
alleviated due to caching and lazy mmaping of unused blocks,
and in fact the single binary should have better caching
characteristics.
Comparing the size of the individual versus single binary on x86_64:
$ cd src
$ size coreutils
$ size -t $(../build-aux/gen-lists-of-programs.sh --list-progs |
grep -Ev '(coreutils|libstdbuf)') | tail -n1
text data bss dec hex filename
1097416 5388 88432 1191236 122d44 src/coreutils
4901010 124964 163768 5189742 4f306e (TOTALS)
Storage requirements are reduced similarly:
$ cd src
$ du -h coreutils
$ du -ch $(../build-aux/gen-lists-of-programs.sh --list-progs |
grep -Ev '(coreutils|libstdbuf)') | tail -n1
1.2M coreutils
5.3M total
When installing, the makefile will create either symlinks or
shebangs based on the --enable-single-binary setting, for
each configured tool. In this way, all the tools are still
callable individually, but they are all implemented by the same
"coreutils" binary installed on the same directory.
* .gitignore: Add new generated files.
* Makefile.am: New rules to generate build-aux/gen-single-binary.sh
and install symlinks.
* NEWS: Mention the new feature.
* README: Add "coreutils" to the list of utils.
* bootstrap.conf: Regenerate src/single-binary.mk
* build-aux/gen-lists-of-programs.sh: New --list-progs option.
* build-aux/gen-single-binary.sh: Regenerate
* configure.ac: New --enable-single-binary option and other variables.
Disallow --enable-single-binary=symlinks with --program-prefix et. al.
* man/coreutils.x: Manpage hook.
* man/local.mk: Add manpage hook and fix dependencies.
* src/coreutils.c: Multicall implementation.
* src/local.mk: New rules for the single binary option.
* tests/local.mk: Add $single_binary_progs to support
require_built_() from init.cfg
* tests/misc/env.sh: Avoid the use of symlink to echo.
* tests/misc/help-version.sh: Add exception for coreutils.
* tests/install/basic-1.sh: Really avoid using ginstall strip
functionality if there is an issue with the independent strip command.
* src/kill.c: Changes to call exit() in main.
* src/readlink.c: Likewise.
* src/shuf.c: Likewise.
* src/timeout.c: Likewise.
* src/truncate.c: Likewise.
Avoid complicated and error-prone parsing of df's output via
sed(1), cut(1), etc., and instead use df's more modern --output
option.
* src/ioblksize.h (in a comment): Simplify the extraction of the
device name of the mounted file system from df's output.
* tests/dd/skip-seek-past-dev.sh: Likewise.
* tests/du/2g.sh: Likewise for the 'avail' column here.
Also avoid the deprecated use of "tail -NUM".
* tests/misc/stat-mount.sh: While at it, remove the determination
of the mount point of "." via df(1) plus sed(1) as it is unused
since commit v8.5-159-gf57cb37 anyway. Instead, improve this test
by verifying that the output of "stat -c%m ." at least starts with
a slash '/'.
Revert commit v8.22-131-g3e89d5b as even though POSIX
states that the default mode should be -L,
common practice for stand-alone pwd implementations
is to default to -P.
* src/pwd.c (usage): Retain mention of the default mode of operation.
Suggested by Bob Proulx
* tests/ls/readdir-mountpoint-inode.sh: Quote appropriately
to process mount points with spaces in the path.
Previously items like these would usually be skipped,
though if the path also contained a '-' for example,
that would stat stdin, thus producing a wrong inode
and a false failure.
Fixes http://bugs.gnu.org/17863
This works for any program that might also be a shell built-in.
It is more concise. In addition, it makes output more reproducible:
some diagnostics include argv[0], which will now be just the program
name, rather than the full absolute name of the executable.
* tests/misc/sort-compress.sh: Use env kill, rather than absolute name.
* tests/install/trap.sh: Likewise.
* tests/misc/timeout.sh: Likewise.
* tests/touch/no-dereference.sh: Do the same for two uses of "test".
* tests/touch/no-create-missing.sh: Likewise.
On systems without libselinux, context_t is defined as an int type,
but defined as a pointer type by SELinux.
* src/chcon.c: Init with 0 rather than NULL to avoid warning.
* tests/misc/pwd-option.sh (base): Initialize with -P,
now that -L is the default, to accommodate an initial
working directory with a symlink component.
* tests/misc/readlink-fp-loop.sh: Use $(env pwd -P) to get the
absolute working directory. Using "env" ensures we do not invoke
any shell built-in, and PATH ensures we invoke the one from coreutils.
* tests/readlink/can-e.sh: Likewise.
* tests/readlink/can-f.sh: Likewise.
* tests/readlink/can-m.sh: Likewise.
The security_context_t type was always an artificial separation
from a standard char* string, and various libselinux using code
assumed both were synonymous. In addition, prior to libselinux 2.3
function declarations were incorrect wrt constness of this type.
Here we replace security_context_t with char*, and also
provide a wrapper function to cater for the const issue on
older libselinux.
* src/system.h (se_const): A new function to avoid and identify
the const issue on older libselinux.
* src/copy.c: s/security_context_t/char */.
* src/cp.c: Likewise.
* src/id.c: Likewise.
* src/install.c: Likewise.
* src/ls.c: Likewise.
* src/mkdir.c: Likewise.
* src/mkfifo.c: Likewise.
* src/mknod.c: Likewise.
* src/runcon.c: Likewise.
* src/selinux.c: Likewise.
* tests/cp/no-ctx.sh: Likewise.
* src/chcon.c: Likesize.
Since context is verified by security_check_context() it can be used in
change_file_context() without converting to context_t every time.
* src/chcon.c (change_file_context): Use specified_context directly.
context_new() and _free() are used for checking validity of a
specified context. libselinux provides security_check_context
for this purpose so use it.
Note that context_new() can fail for a valid context - e.g. ENOMEM.
* src/chcon.c (main): Use security_check_context().
* src/pwd.c (main): Adjust default mode to be "logical"
and independent of the POSIXLY_CORRECT env var.
(usage): Mention the default mode of operation.
* doc/coreutils.texi (pwd invocation): Adjust accordingly.
* tests/misc/pwd-option.sh: Likewise.
* NEWS: Mention the change in behavior.
* HACKING: GID is more useful in tests than group name, so rename
input param from NON_ROOT_GROUP to NON_ROOT_GID to make it obvious
that only a group ID is now acceptable, thus allowing GID lookups
to be avoided throughout the tests.
* init.cfg (require_root_): Likewise.
* tests/misc/truncate-owned-by-other.sh: Avoid looking up the GID.
* tests/touch/now-owned-by-other.sh: Likewise.
* tests/misc/chroot-credentials.sh: Likewise. Also fix an instance
of comparison against NON_ROOT_GROUP which would have given a false
failure if a non numeric value was passed in.
* tests/id/setgid.sh: Use previously looked up gid as a more
accurate base for the subsequent adjustment, and move
the uid lookup within chroot, rather than having the overhead
of a separate `id` invocation.
* src/id.c (print_full_info): When no user is specified,
output the effective group for the _process_, rather than
the default group from the system database, which may be different.
* tests/id/setgid.sh: Add a case for `id` as well as `id -G`.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/7320
Reported at http://bugzilla.redhat.com/1016163
* src/df.c (last_device_for_mount): A new function to identify
the last device mounted for a mount point.
(get_disk): Use the above to discard mount entries for a device,
where a later mount entry uses a different device name than
that of the user specified device.
* tests/df/over-mount-device.sh: A new root test.
* tests/local.mk: Reference the new test.
* NEWS: Reword for all these related recent fixes.
Discussed at: http://bugs.gnu.org/16539#69
* src/df.c (get_disk): Include whether we can access the mount dir,
in the mount entry selection criteria. This handles the case where
a device is (bind) mounted multiple times with the shortest mount path
not being accessible, while some of the other mount points are.
Discussed at: http://bugs.gnu.org/16539#63
A system provided mount entry may be unavailable due to TOCTOU race,
or if another device has been over-mounted at that position, or due to
access permissions. In all these cases output "-" placeholder values
rather than either producing an error, or in the over-mount case
outputting values for the wrong device.
* src/df.c (device_list): A new global list now updated by
filter_mount_list().
(filter_mount_list): Adjust to take a parameter as to whether
update the global mount list, or only the mount <-> device ID mapping.
(get_dev): Use the device ID mapping to ensure we're not outputting
stats for the wrong device. Also output placeholder values when we
can't access a system specified mount point.
(get_all_entries): Set the DEVICE_ONLY param for filter_mount_list().
(devname_for_dev): A new function to search the mount <-> dev mapping.
* test/df/skip-duplicates.sh: Adjust accordingly.
* NEWS: Mention the bug fixes.
Discussed at: http://bugs.gnu.org/16539
* src/du.c (process_file): Treat cycles due to bind mounts
like cycles due to following symlinks.
* tests/du/bind-mount-dir-cycle.sh: Adjust accordingly.
* NEWS: Mention the change in behavior.
Reported at http://bugzilla.redhat.com/836557
* doc/coreutils.texi (chown invocation): Mention the system dependent
restrictions on setting groups.
(chgrp invocation): Likewise. Reference the 'chown' superset.
* man/chgrp.x: Cross reference chown(1) which is the superset interface,
and also chown(2) which gives details of the platform restrictions.
Fixes http://bugs.gnu.org/17495
* src/df.c (filter_mount_list): Recent commit v8.22-108-g25a2c94
failed to copy file system type along with the updated device name.
Therefore simply replace the existing mount entry with the
current one with all the latest device details. Note the name,
even if not shorter in this entry, will be replaced with a shorter
name in a subsequent mount entry.
* tests/df/skip-duplicates.sh: Add a test case.
* src/seq.c (main): Avoid seq_fast() with a start or end of -0.
* tests/misc/seq.pl: Add test cases.
* NEWS: Mention the fix.
Fixes http://bugs.gnu.org/17800
Veritas File System can run in single instance or clustered mode,
so mark as remote to avoid using inotify for the latter case.
* src/stat.c (human_fstype): Tag VXFS as remote, to use polling
for the clustered variant (VXCFS).
* NEWS: Mention the bug fix.
Reported by Ondřej Vašík in http://bugzilla.redhat.com/1104244
Fixes http://bugs.gnu.org/17770
* src/numfmt.c (double_to_human): The printf format is built up in
a stack buffer which is big enough to hold any of the possible formats.
However the size parameter passed to snprintf was too big by 1
when GROUP was true. So decrease the buffer available to snprintf
to avoid this theoretical in practise but valid coverity warning.
* src/install.c (install_file_in_file_parents): Factor out the
creation of any parent directories into ...
(mkancesdirs_safe_wd): ... this new function.
(install_file_in_dir): Add the parameter 'mkdir_and_install', and
call the above new function if it evaluates to true.
(main): During parsing of the -t option, move the check whether
the target_directory exists down after the option parsing loop,
and do not complain about stat(optarg,...) failing if -D was given.
Pass 'mkdir_and_install' to install_file_in_dir().
* doc/coreutils.texi (install invocation): Remove the (false)
restriction that -D would be ignored together with -t. Instead,
clarify install's new bahavior.
Fix the node's reference in the top-level @direntry for consistency.
* src/install/basic-1.sh: Add tests for the now-allowed combination
of the -D and -t options.
* NEWS: Mention the improvement.
* configure.ac: Remove the -Wsuggest-attribute=pure
enablement on GCC >= 4.7, as that was moot since
gnulib was already enabling that warning in its default set.
The false positive was seen with 4.6.2, but confirmed
not present in 4.6.3, so that's sufficiently old to
just leave this enabled unconditionally.
Remove the -Wsuggest-attribute={const,noreturn}
enablement, as gnulib already has those in the default set.
Enable the -Wlogical-op warning for GCC >= 4.8.0
as that is confirmed OK with coreutils at least, due to
fixing: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=43772
Remove the -Wno-logical-op override since the main
-Wlogical-op flag is now sufficient to control this warning
as of GCC 4.6.3 at least.
* src/true.c (main): Add a comment about the possibility
of true returning EXIT_FAILURE due to write failure.
* tests/misc/false-status.sh: Fix so we're testing
the tool and not the shell builtin. Add a case for true(1).
* tests/misc/help-version.sh: Skip /dev/full test
for true as well as false since the exit status is tested separately.
Also remove the iterations for different LC_MESSAGES, as this was only
applied for false(1). Translations are not honored in the test dir
and so would need separate handling in any case.
* src/df.c (get_dev): asssert() on Solaris 10 is not marked as
__noreturn__ and thus the compiler may think V is uninitialized
later on in the function.
* THANKS.in: Remove the now committer.
* configure.ac: When looking for a .git checkout, exclude repos that
contain a .tarball-version file as these are probably releases
that are imported into git for patch management.
commits v8.20-98-g51ce0bf and v8.20-99-gd302aed changed cut(1)
to process each line independently and thus promptly output
each line without buffering. As part of those changes we removed
the special handling of --delimiter=$'\n' --fields=... which
could be used to select arbitrary (ranges of) lines, so as to
simplify and optimize the implementation while also matching the
behavior of different cut(1) implementations.
However that GNU behavior was in place for a long time, and
could be useful in certain cases like making a separated list like
`seq 10 | cut -f1- -d$'\n' --output-delimiter=,` although other tools
like head(1) and paste(1) are more suited to this operation.
This patch reinstates that functionality but restricts the
"line behind" buffering behavior to only the -d$'\n' case.
We also fix the following related edge case to be more consistent:
before> printf "\n" | cut -s -d$'\n' -f1- | wc -l
2
before> printf "\n" | cut -d$'\n' -f1- | wc -l
1
after > printf "\n" | cut -s -d$'\n' -f1- | wc -l
1
after > printf "\n" | cut -d$'\n' -f1- | wc -l
1
* src/cut.c (cut_fields): Adjust as discussed above.
* tests/misc/cut.pl: Likewise.
* NEWS: Mention the change in behavior both for v8.21
and this effective revert.
* cfg.mk (old_NEWS_hash): Adjust for originally omitted v8.21 entry.
* src/paste.c: s/delimeter/delimiter/ comment typo fix.
The device name reported for a particular mount entry
may no longer be valid if the mount point was subsequently
mounted on a different device. Therefore honor the order
of the mount list returned by the system and use the last
reported device name.
* src/df.c (filter_mount_list): When discarding the current
mount entry, ensure that a new device name is not also discarded.
* tests/df/skip-duplicates.sh: Add a test case. Also fix
a false failure in the edge case of a system with only a
single file system.
* NEWS: Mention the fix.
* src/join.c (usage): Reword to avoid implication that
the NUL byte is only generated as the output delimeter.
* src/sort.c (usage): Likewise.
* src/shuf.c (usage): Likewise. Also since we're changing the
translation string take the opportunity to separate out
the description to a separate string to reduce translation overhead.
* src/uniq.c (usage): Likewise.
* src/stty.c (usage): s/null/NUL/ for consistency.
* src/basename.c (usage): Reword for accuracy/consistency.
* src/dirname.c (usage): Likewise.
* src/du.c (usage): Likewise.
* src/env.c (usage): Likewise.
* src/printenv.c (usage): Likewise.
* src/readlink.c (usage): Likewise.
* src/realpath.c (usage): Likewise.
* doc/coreutils.texi: Consolidate/share the descriptions of
--null, --zero and --zero-terminated.
* src/stat.c (human_fstype): Adjust a couple of existing constants
to be a consistent width and capitalization so that the
src/fs-magic-compare target works without reporting false positives.
* cfg.mk (sc_fs-magic-compare): A new syntax check to enforce this.
Improved by: Jim Meyering
__SUNPRO_C >= 0x590 /*12.0*/ supports __attribute((constructor))
required by stdbuf, so use a more direct check for this.
Note ensure that --libexecdir is set to the appropriate
install location for libstdbuf.so so that stdbuf works
when installed on the system like it does when running
tests in the build directory.
* configure.ac (stdbuf_supported): Use a test prog to determine support.
* src/libstdbuf.c (stdbuf): Define appropriately for non GCC compilers,
and provide early feedback (compilation warning) if trying to compile
libstdbuf without the necessary support.
* src/stdbuf.c (set_LD_PRELOAD): Add a note on having stdbuf
look for libstdbuf.so in the default lib search path.
* cfg.mk (sc_prohibit-gl-attributes): Adjust so we can exclude
libstdbuf.so from prohibiting '__attribute', since we want
this form to avoid silently eliding this required attribute on non GCC.
Reported and tested by Rich Burridge.
* src/chroot.c (is_root): A new helper function to
determine if the passed argument is the root directory
based on inode comparison.
(main): Use the new helper rather than comparing strings.
* tests/misc/chroot-fail.sh: Add cases for alternative root paths.
* src/chroot.c (main): Consistently exit with failure status immediately
upon hitting a terminal issue, rather than diagnosing multiple issues
lest users think previous failing actions are optional.
It's dangerous and confusing to leave root's supplemental
groups in place when specifying other users with --userspec.
In the edge case that that is desired one can explicitly
specify --groups.
Also we implicitly set the system defined supplemental groups
for a user. The existing mechanism where supplemental groups
needed to be explicitly specified is confusing and not general
when the lookup needs to be done within the chroot.
Also we extend the --groups syntax slightly to allow clearing
the set of supplementary groups using --groups=''.
* src/chroot.c (setgroups): On systems without supplemental groups,
clearing then is a noop and so should return success.
(main): Lookup the primary GID with getpwuid() when just a numeric
uid is specified, and also infer the USERNAME from this call,
needed when we're later looking up the supplemental groups for a user.
Support clearing supplemental groups, either implicitly for
unknown users, or explicitly when --groups='' is specified.
* tests/misc/chroot-credentials.sh: Various new test cases
* doc/coreutils.texi (chroot invocation): Adjust for the new behavior.
* NEWS: Mention the change in behavior.
This allows chroot to be used as a light weight tool
to change user identification for a command,
while not changing the current working directory.
It also makes `chroot / true` consistently succeed on
all platforms for non root users.
* src/chroot.c (main): If the same root is specified. i.e. '/'
then don't change the current working directory, and avoid the
overhead of the other redundant calls.
* tests/misc/chroot-fail.sh: Remove failure guard previously
needed on some systems. Also add an explicit case to ensure
we don't change directory.
* NEWS: Mention the change in behavior.
* src/df.c (decode_output_arg): Use only enum constants to avoid
clang "warning: comparison of constant -1 with expression of
type 'display_field_t' is always false"
Linux with network namespaces contains entries in /proc/mounts like:
proc net:[4026532464] proc rw,nosuid,nodev,noexec,relatime 0 0
resulting in a failure to stat 'net:[...]', inducing a warning
and an exit with failure status.
* src/df.c (get_dev): Ignore all relative mount points.
* tests/df/skip-duplicates.sh: Add an entry to test relative dirs.
The symlink handling in commit v8.21-172-g33660b4 was incomplete
in the case where there were symlinks in the mount list itself.
For example, in the case where /dev/mapper/fedora-home was in the
mount list and that in turn was a symlink to /dev/dm-2, we have:
before> df --out=source /dev/mapper/fedora-home
devtmpfs
after > df --out=source /dev/mapper/fedora-home
/dev/mapper/fedora-home
* src/df.c (get_disk): Compare canonicalized device names from
the mount list. Note we still display the non canonicalized name,
even if longer, as we assume that is the most representative.
* tests/df/df-symlink.sh: This could theoretically fail on some systems
depending on the content of the mount list, but adjust to fail on any
system where symlinks are present in the mount list for the current dir.
* src/df.c (filter_mountlist): Remove the constraint that
a '/' needs to be in the device name for a mount entry to
be considered for deduplication. Virtual file systems also
have storage associated with them (like tmpfs for example),
and thus need to be deduplicated since they will be shown
in the default df output and subject to --total processing also.
* test/df/skip-duplicates.sh: Add a test to ensure we deduplicate
all entries, even for virtual file systems. Also avoid possible
length operations on many remote file systems in the initial
check of df operation. Also avoid the assumption that "/root"
is on the same file system as "/".
* NEWS: Mention the change in behavior.
* tests/ls/stat-vs-dirent.sh: This test lists all parent directories,
and would spuriously fail if any of those had a file name with a
leading space as the first entry. There is only ever a single space
between the right aligned inode number and the file name, so
process accordingly.
* src/shred.c (main): With the preceding change, shred -s-2 FILE
would write 64KB blocks forever -- or until disk full. This change
makes shred reject a negative size.
* tests/misc/shred-negative.sh: New file.
* tests/local.mk (all_tests): Add it.
* src/shred.c (main): Limit -n (number of passes) value to
ULONG_MAX, not to UINT32_MAX, since the vars are unsigned long.
Limit the -s (file size) value to OFF_T_MAX.
* tests/dd/ascii.sh: Avoid unnecessary subshells. Catch dd's
exit code. Remove testing artifact. In the case of a comparison
failure, show the differences in octal format in addition to
"binary files differ". Simplify the creation of the 'in' file.
Problem reported by Don Baggett in <http:/bugs.gnu.org/17422>.
* NEWS:
* doc/coreutils.texi (dd invocation): Document this.
* src/dd.c (conversions): conv=ascii implies conv=unblock.
conv=ebcdic and conv=ibm imply conv=block.
(ascii_to_ebcdic, ebcdic_to_ascii): Correct to match
POSIX 1003.1-2013.
* tests/dd/ascii.sh: New file.
* tests/local.mk (all_tests): Add it.
* src/copy.c (copy_internal): Include the copy_attr() call for symlinks.
This should not dereference symlinks, since llistxattr() is used
in attr_copy_file() in libattr, and so should copy all but the filtered
extended attributes. Note we don't just move the copy_attr() call
before the set_owner() call, as that would break capabilities
for non symlinks.
* tests/cp/cp-mv-enotsup-xattr.sh: Add a test case.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/16131
The devmsg() calls that took quote_n() arguments,
didn't normally output anything, but still incurred
the overhead of those quote_n() calls.
* src/numfmt.c (devmsg): Move the inline function
with _internal_ enablement check to...
* src/system.h: ...here as a variadic macro, with
the enablement check at the outer level.
* src/factor.c: As per numfmt.c but there is no
performance change in this case.
* NEWS: Mention the significant performance improvement.
* src/numfmt.c (setup_padding_buffer): Simplify the code by not
explicitly dealing with heap exhaustion.
(parse_format_string): Likewise. Handle multiple grouping
modifiers as does the standard printf. Handle the new leading
zero --format modifier.
(double_to_human): Use more defensive coding against overwriting
stack buffers. Honor the leading zeros width.
(usage): Mention the leading zero --format modifier.
(main): Allow --padding in combo with a --format (width),
as the number of leading zeros are useful independent of
the main field width.
* doc/coreutils.texi (numfmt invocation): Likewise.
* tests/misc/numfmt.pl: Add new test cases.
* NEWS: Mention the improvement.
* doc/coreutils.texi (pr invocation): Clarify that -w or -W
will be rounded down so that each column has the same width.
Adjust the wording for -W, to avoid the implication that the
width of -S is insignificant to the page width.
* src/pr.c (usage): Add a period to avoid ambiguity in
the man page output.
This issue was identified by running the test suite with
http://code.google.com/p/address-sanitizer/
which is included in GCC 4.8 and enabled with -fsanitize=address
This was checked on Fedora 20 with GCC 4.8 as follows:
$ yum install libasan # http://bugzilla.redhat.com/991003
$ rm -f src/ptx.o
$ make check AM_CFLAGS='-fsanitize=address' SUBDIRS=. VERBOSE=yes
$ failure identified in tests/test-suite.log
To see this particular failure triggered with multiple files:
$ src/ptx <(echo a) <(echo a) 2>&1 | asan_symbolize.py -d
=================================================================
==32178==ERROR: AddressSanitizer: heap-buffer-overflow on address
0x60200000e74f at pc 0x435442 bp 0x7fffe8a1b290 sp 0x7fffe8a1b288
READ of size 1 at 0x60200000e74f thread T0
#0 0x435441 in define_all_fields coreutils/src/ptx.c:1425
#1 0x7fa206d31d64 in __libc_start_main ??:?
#2 0x42f77c in _start ??:?
0x60200000e74f is located 1 bytes to the left of 3-byte region
[0x60200000e750,0x60200000e753) allocated by thread T0 here:
#0 0x421809 in realloc ??:?
#1 0x439b4e in fread_file coreutils/lib/read-file.c:97
Shadow bytes around the buggy address:
0x0c047fff9c90: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c047fff9ca0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c047fff9cb0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c047fff9cc0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c047fff9cd0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fd fd
=>0x0c047fff9ce0: fa fa 03 fa fa fa fd fd fa[fa]03 fa fa fa 00 00
0x0c047fff9cf0: fa fa 04 fa fa fa 04 fa fa fa fd fa fa fa fd fa
0x0c047fff9d00: fa fa 00 fa fa fa fd fa fa fa 00 fa fa fa 00 fa
0x0c047fff9d10: fa fa fd fa fa fa fd fa fa fa fd fa fa fa fd fa
0x0c047fff9d20: fa fa fd fa fa fa fd fa fa fa fd fa fa fa fd fa
0x0c047fff9d30: fa fa fd fa fa fa 00 fa fa fa 00 fa fa fa 00 fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Heap right redzone: fb
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack partial redzone: f4
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
ASan internal: fe
==32178==ABORTING
The initial report and high level analysis were from Jim Meyering...
"The underlying problem is that swallow_file_in_memory()
is setting the contents of the global text_buffer for the first file,
then updating it (clobbering old value) for the second file.
Yet, some pointers to the initial buffer have been squirreled away
and later, one of them (keyafter) is presumed to point into
the new "text_buffer", which it does not. The subsequent
SKIP_WHITE_BACKWARDS use backs up "cursor" and goes out of bounds."
* src/ptx.c (text_buffers): Maintain references for the limits of each
buffer corresponding to each file, rather than just the last processed.
(struct OCCURS): Add a member to map back to the corresponding file.
Note normally this could be computed from the "reference" member
rather than needing the extra storage, however this is not possible
when in --references mode.
(find_occurs_in_text): Reference the array rather than a single entry.
(define_all_fields): Likewise. Also avoid computing the file index
since this is now stored directly.
(main): Update text_buffers[] array rather than a single text_buffer.
* tests/misc/ptx-overrun.sh: Even though this issue is already triggered
with AddressSanitizer, add a new case to demonstrate the whitespace
trimming issue, and to trigger without AddressSanitizer.
Fixes https://bugs.gnu.org/16171
Since the recent commit v8.22-68-g08783f1, ls coloring
is now dependent on the COLORTERM environment variable.
* tests/envvar-check: Unset COLORTERM from test environment.
* tests/ls/color-dtype-dir.sh: Ensure coloring is used.
* tests/misc/ls-misc.pl: Likewise.
Prompted by the continuous integration build failure at:
http://hydra.nixos.org/build/10397646
mach-color was replaced by mach-gnu-color in Hurd in 2012.
mach-color is left for compatibility and corresponding
definitions for mach-color are still found in ncurses.
* src/dircolors.hin: Add hurd and mach-gnu-color.
--colors controls whether to output colors depending on
whether we're connected to a terminal or not, while this
change gives control over which terminals we output colors to.
* NEWS: Mention the change in behavior.
* src/ls.c (known_term_type): A new function to search the static
list from dircolors.h
(parse_ls_colors): Honor the TERM when both LS_COLORS and COLORTERM
are non empty.
* tests/ls/color-term.sh: A new test.
* tests/local.mk: Reference the new test.
Fixes http://bugs.gnu.org/15992
* src/remove.c (prompt): Explain where the difficulty with translating
these two strings resides, and suggest an alternative: the one that
Paul Eggert first proposed back in 2002, which seems fully resistant.
* tests/dd/sparse.sh: When testing that a hole is created,
use an existing sparse destination file, so that we're
not write extending the file size, and thus avoiding
speculative preallocation which can result in smaller
holes than requested.
Workaround suggested by Brian Foster
* src/ln.c (do_link): It's not obvious that record_file() is a noop
in the symlink case (in that case dest_set is NULL and so ignored).
So to make it obvious, and to avoid false positives seen in coverity,
add the explicit condition here.
* doc/coreutils.texi (shred invocation): Mention some reasons
why clearing slack space might be useful.
* src/shred.c (do_wipefd): Add initial writes for each pass
for small regular files in case the storage for those is
in the inode, and thus a larger write up to a block size would
bypass that. Move the direct I/O control to...
(dopass): ... here so we can avoid enabling it for these small
initial writes. It's better to retry direct I/O for each pass
anyway to handle the case where direct I/O is disabled for only
the last portion of a file when the size is not a multiple of
the block size. Note we don't avoid the sync for the initial
write as it will be small but more importantly could be on a
different part of the disk and so worth doing independently
to ensure the write is not discarded.
* tests/misc/shred-exact.sh: Check some more direct I/O cases.
* NEWS: Mention the improvements.
The inode storage issue was mentioned by Paul Eggert.
* src/shred.c (do_wipefd): Don't increase the size written
for an empty file up to a full block. Also increase the size
to OFF_T_MAX in the edge case where we do overflow.
* NEWS: Mention the shred improvements from recent changes.
* tests/misc/shred-passes.sh: Adjust as we no longer
write a BLKSIZE of data for empty files.
* src/copy.c (copy_internal): Replace dev_t arg DEVICE with struct
stat pointer arg PARENT. All callers changed. This removes an
unwarranted assumption that dev_t values of 0 cannot occur in file
systems. See: http://bugs.gnu.org/17179
See: http://bugs.gnu.org/17149
* src/shred.c [__linux__]: Include <sys/mtio.h>.
(dorewind): New function, which works around the lseek problem with
tape drives on GNU/Linux, the same way that dd does.
(dopass): Use it. New arg ST, needed for dorewind. All uses changed.
(do_wipefd): Don't rely on undefined behavior on integer overflow
of file sizes. Use INT_ADD_OVERFLOW instead.
This removes an unportable assumption that if lseek succeeds, the
file is capable of seeking. See: http://bugs.gnu.org/17145
* src/head.c (elseek): New function, for consistency in reporting
lseek failures.
(elide_tail_bytes_file, elide_tail_lines_seekable)
(elide_tail_lines_file, head_lines, head): Use it.
(elide_tail_bytes_file, elide_tail_lines_file):
New args CURRENT_POS and SIZE. All uses changed. Don't bother
invoking lseek, since we know the file's pos and size now.
(elide_tail_bytes_file): Change a local from uintmax_t to off_t,
since it fits.
(head): Use lseek only on regular files, since its behavior on
unseekable devices is implementation-defined.
* NEWS: Document this.
* src/copy.c (overwrite_ok): Fix the gettext calls so
that the second string is tagged for translation.
Display the correct "replace ..." prompt when in move_mode.
* tests/mv/i-3.sh: Display the output on failure to ease debugging.
* src/ptx.c (main): Add a 'break' after the --format handling case.
Otherwise it would fall through into the usage case.
* tests/misc/ptx.pl: Add test cases for --format=tex and --format=roff.
* NEWS (Bug fixes): Mention the fix.
Bug introduced in 1999-04-04 commit, SH-UTILS-1_16f-269-gd815c15.
Spotted by coverity (MISSING_BREAK).
* src/copy.c (overwrite_ok): Rename from overwrite_prompt. Invoke
yesno instead of having the caller do it; that's cleaner. Return
bool, not void. All callers changed.
* src/copy.c (overwrite_prompt): New arg X. All callers changed.
Use X to improve the quality of the prompt (Bug#17087).
* tests/mv/i-2.sh, tests/mv/i-3.sh: Change test to match new prompt.
Input buffering is best avoided because it introduces
delayed processing of output for intermittent input,
especially when the output size is less than that of
the input buffer. This is significant when output
is being further processed which could happen if split
is writing to precreated fifos, or through --filter.
If input is arriving quickly from a pipe then this will
already be buffered before we read it, so fast arriving
input shouldn't be a performance issue.
* src/split.c (lines_split, lines_bytes_split, bytes_split,
lines_chunk_split, bytes_chunk_extract): s/full_read/safe_read/.
* THANKS.in: Mention the reporter.
* NEWS: Mention the improvement.
The description of -u was inaccurate when combined with -D:
$ printf '%s\n' '1 a' '2 a' | uniq -uD -f1
1 a
* doc/coreutils.texi (uniq invocation): Clarify that it's
the last repeated line that is suppressed from the output.
Fixes http://bugs.gnu.org/17022
* src/chroot.c (setgroups): Change this replacement to
fail when called so that platforms like Interix without support for
supplemental groups don't silently ignore a --groups option.
For files with "special" bits set, we would stat the relative
file name in the wrong directory, giving an erroneous ENOENT diagnostic.
This issue was introduced with commit v5.92-653-gc1994c1
which changed fts to not change directory on traversal.
* src/chmod.c (mode_changed): Use fts->fts_cwd_fd with fstatat rather
than stat. All callers changed.
* tests/chmod/c-option.sh: Add a test case.
* NEWS: Mention the fix.
Fixes http://bugs.gnu.org/17035
* gl/lib/fadvise.c: s/the the/the/, indroduced in commit
v8.22-40-g4f21182. Promted by sc_prohibit_doubled_word.
While at it, also s/be candidate/be a candidate/.
Problem reported by Rich Burridge.
* src/stat.c [HAVE_GETATTRAT]: Include <attr.h>, <sys/nvpair.h>.
(print_statfs, print_stat, print_it):
Pass fd, too, for the benefit of get_birthtime.
All uses changed.
(get_birthtime): New function, for porting to Solaris 11.
(print_stat): Use it.
* configure.ac (getattrat, LIB_NVPAIR): New checks.
* src/local.mk (src_stat_LDADD): Add $(LIB_NVPAIR).
Prior to this change, "ln -sr '' F" would segfault, attempting
to read path2[1] in relpath.c's path_common_prefix function.
This problem arises whenever canonicalize_filename_mode returns
NULL.
* src/ln.c (convert_abs_rel): Call relpath only when
both canonicalize_filename_mode calls return non-NULL.
* tests/ln/relative.sh: Add a test to trigger this failure.
* THANKS.in: List reporter's name/address.
* NEWS (Bug fixes): Mention it.
Reported by Erik Bernstein in 739752@bugs.debian.org.
Fixes http://bugs.gnu.org/17010.
* gl/lib/fadvise.c: Use a pragma to turn off this warning option:
-Wsuggest-attribute=const. Without this change, building with
--enable-gcc-warnings would evoke this error:
lib/fadvise.c:25:1: error: function might be candidate for\
attribute 'const' [-Werror=suggest-attribute=const]
- Support arbitrary numbers in --groups, consistent with
what is already done for --userspec
- Avoid look-ups entirely for --groups items with a leading '+'
- Support names that are actually numbers in --groups
- Ignore an empty --groups="" option for consistency with --userspec
- Look up both inside and outside the chroot with inside taking
precedence. The look-up outside may load required libraries
to complete the look-up inside the chroot. This can happen for
example with a 32 bit chroot on a 64 bit system, where the
32 bit NSS plugins within the chroot fail to load.
* src/chroot.c (parse_additional_groups): A new function refactored
from set_addition_groups(), to just do the parsing. The actual
setgroups() call is separated out for calling from the chroot later.
(main): Call parse_user_spec() and parse_additional_groups()
both outside and inside the chroot for the reasons outlined above.
* tests/misc/chroot-credentials.sh: Ensure arbitrary numeric IDs
can be specified without causing look-up errors.
* NEWS: Mention the improvements.
* THANKS.in: Add Norihiro Kamae who initially reported the issue
with a proposed patch.
Also thanks to Dmitry V. Levin for his diagnosis and sample patch.
On most shells `:>file || framework_failure_` will not evaluate
the framework_failure_ even if there was an error writing the file.
shells which do evaluate the failure are ksh 93u+ and bash 4.2,
while shells wich don't include bash 4.3, solaris, freebsd, dash.
Furthermore this construct is problematic on Solaris 10 sh,
which will try to optimize away a `:' command in a loop
after the first iteration, even if it is redirected.
* tests/cp/link-deref.sh: Remove the leading colon on redirections.
* tests/cp/reflink-perm.sh: Likewise.
* tests/id/zero.sh: Likewise.
* tests/install/install-C.sh: Likewise.
* tests/misc/env.sh: Likewise.
* tests/misc/md5sum-bsd.sh: Likewise.
* tests/misc/runcon-no-reorder.sh: Likewise.
* tests/mv/partition-perm.sh: Likewise.
* tests/rm/r-root.sh: Likewise.
* tests/split/l-chunk.sh: Likewise.
* tests/split/line-bytes.sh: Likewise.
* tests/tail-2/inotify-rotate.sh: Likewise.
* tests/tail-2/retry.sh: Likewise.
* tests/tail-2/symlink.sh: Likewise.
* tests/tail-2/wait.sh: Likewise.
* tests/touch/read-only.sh: Likewise.
+ cfg.mk (sc_prohibit_colon_redirection): A new syntax check
to avoid further instances of this creeping in.
* tests/misc/nohup.sh: When running tests without a controlling tty,
an exec failure is triggered in a subshell, which causes POSIX
shells to immediately exit the subshell. This was brought
to notice by the newly conforming bash 4.3.
Fixes http:/bugs.gnu.org/16940
* src/df.c (usage): Adjust the --human and --si descriptions
to not depend on each other. Also include an example that is
illustrative of the rounding, suffix, width, and localized fractions.
* src/system.h (emit_size_note). Adjust so that it's obvious the
description is pertaining to the input SIZE argument, and not
to any sizes that might be output by df for example.
Fixes http://bugs.gnu.org/16922
* NEWS: Mention the fix.
* gnulib: Update to incorporate the fix.
This is the only change in this gnulib update.
* tests/misc/date.pl: Add a test for this case.
Fixes http://bugs.gnu.org/16872
* src/shuf.c (main): s/No/no/, introduced by commit v8.22-25-g9f60f37.
* NEWS: Also adjust the NEWS for that recent commit to make it
clear this was new bug rather than a regression.
Prompted by the syntax-check rule sc_error_message_uppercase
* doc/coreutils.texi (dd invocation): Add an example for how to call
dd to save data from a failing disk. Mention GNU 'ddrescue' as one
of the more specialized tools in such a case.
Problem reported by valiant xiao in <http://bugs.gnu.org/16855>.
* NEWS: Document this.
* src/shuf.c (main): With -r, report an error if the input is empty.
* tests/misc/shuf.sh: Test for the bug.
* src/copy.c (copy_reg): If linkat() is available it doesn't
matter about the gnulib emulation provided, and thus the
LINK_FOLLOWS_SYMLINKS should not have significance here.
This was noticed on FreeBSD and the consequence is that
cp --link will create hardlinks to symlinks there, rather
than emulating with symlinks to symlinks.
* tests/cp/link-deref.sh: Adjust the checks to cater
for all cases where hardlinks to symlinks are supported.
If we can't output more data, we should immediately
diagnose the issue and exit rather than consuming all
of input (in some cases).
* src/tail.c (xwrite_stdout): Also diagnose the case where
only some data is written. Also clearerr() to avoid the
redundant less specific error from atexit (close_stdout);
* src/head.c (xwrite_stdout): Copy this new function from tail,
and use it to write all output.
* tests/misc/head-write-error.sh: A new test to ensure we
exit immediately on write error.
* tests/local.mk: Reference the new test.
* src/head.c (elide_tail_lines_pipe): Just output all input in
this case to avoid the issue and also avoid redundant '\n' processing.
(elide_tail_lines_seekable): Likewise.
* tests/misc/head-elide-tail.pl: Add tests for no '\n' at EOF.
* NEWS: Mention the fix.
Fixes http://bugs.gnu.org/16329
* src/od.c (main): Handle the new --endian option,
taking "little" and "big" as parameters.
(usage): Describe the new option.
(PRINT_FIELDS): Adjust to swap bytes if required.
* tests/misc/od-endian.sh: A new test to verify
the byte swapping operations for hex (ints) and floats
for all sizes between 1 and 16 inclusive.
* test/local.mk: Reference the new test.
* doc/coreutils.texi (od invocation): Describe the new option.
* NEWS: Mention the new feature.
This should have been part of the previous commit v8.22-14-gf18999b
* po/POTFILES.in: Remove gnulib files no longer used.
Prompted by the continuous integration build failure at:
http://hydra.nixos.org/build/8288209/
* bootstrap.conf: Reference the used pipe-posix module
rather than the uneeded and larger spawn-pipe module,
which the pipe module is the deprecated equivalent of.
* src/ls.c: Remove all mention of SELinux since ls
should treat all security context labels equally.
* doc/coreutils.texi (ls invocation): Likewise.
(id invocation): Clarify that -Z outputs the context
inherited by the process, rather than one specific to a user.
Note for SMACK this can be set instead by the SMACK64EXEC label,
in the unusual case where this is set on the id executable.
* src/id.c (usage): Likewise.
* src/mkdir.c (usage): Clarify that -Z is specific to SELinux,
while --context=CTX is also supported for SMACK.
* src/mkfifo.c (usage): Likewise.
* src/mknod.c (usage): Likewise.
* src/ln.c (errno_nonexisting): A new function to determine if
the errno implies that a file doesn't or can't (currently) exist.
(target_directory_operand): Use the new function to expand the
set of errors we handle.
* tests/ln/sf-1.sh: Add test cases for the newly handled errors.
* THANKS.in: Mention the reporter.
* NEWS: Mention the bug fix.
* tests/cp/no-ctx.sh: Since the test diagnoses whether the
intercepted lgetfilecon() calls are actually called or not,
restrict the test to systems where that occurs.
The test cases are minimal on non SELinux systems and should
be well covered by other tests.
Reported-by: Bernhard Voelker
* src/selinux.c (restorecon_private): On ArchLinux the
`fakeroot cp -a file1 file2` command segfaulted due
to getfscreatecon() returning a NULL context.
So map this to the sometimes ignored ENODATA error,
rather than crashing.
* tests/cp/no-ctx.sh: Add a new test case.
* tests/local.mk: Reference the new test.
* NEWS: Mention the fix.
Fixes http://bugs.gnu.org/16335
* init.cfg (gcc_shared_): A new function refactored from tests.
(require_gcc_shared_): Adjust to call gcc_shared_() to build the
test library, and remove that library before the function returns.
* tests/cp/nfs-removal-race.sh: Call the new gcc_shared_().
* tests/df/no-mtab-status.sh: Likewise.
* tests/df/skip-duplicates.sh: Likewise.
* tests/ls/getxattr-speedup.sh: Likewise.
* tests/rm/r-root.sh: Likewise.
* src/copy.c (copy_internal): Use the global process context
to set the context of existing directories before they're populated.
This is more consistent with the new directory case, and fixes
a bug for existing directories where we erroneously set the
context to the last copied descendent, rather than to that of
the source directory itself.
* tests/cp/cp-a-selinux.sh: Add a test for this case.
* NEWS: Mention the fix.
* THANKS.in: Add reporter Michal Trunecka.
Prompted by a test framework failure of tests/mkdir/p-acl.sh on armv7l:
The previous test for a working setfacl was not sufficient in some
circumstances.
* init.cfg (require_setfacl_): Call setfacl twice with conflictive
ACL specs, and use ACL specs which can't be mapped into regular file
permission bits. Document the reasons.
On emulated aarch64 systems like in the qemu-based OpenBuildService
of openSUSE, cp fails to copy /proc/cpuinfo because the inode number
changes between the initial stat() call and copying the file:
$ cp /proc/cpuinfo exp
cp: skipping file '/proc/cpuinfo', as it was \
replaced while being copied
* tests/cp/proc-zero-len.sh: When cp fails, check on the above
error message to skip the test.
* src/selinux.c: As the copyright is assigned to the FSF for all
of coreutils, replace the copyright holder from "Red Hat, Inc."
to "Free Software Foundation, Inc.". Prompted by a warning of
'make update-copyright'. Also update the copyright year.
Run "make update-copyright", but then also run this,
perl -pi -e 's/2\d\d\d-//' tests/sample-test
to make that one script use the single most recent year number.
The files 'bootstrap' and 'tests/init.sh' are taken from the
gnulib submodule. Therefore, 'make update-copyright' there should
already have updated the copyright year in these 2 files.
* .x-update-copyright: Add entries for the above mentioned files.
'\" Copyright (C) 2009-2013 Free Software Foundation, Inc.
'\" Copyright (C) 2009-2016 Free Software Foundation, Inc.
'\"
'\" This is free software. You may redistribute copies of it under the terms
'\" of the GNU General Public License <http://www.gnu.org/licenses/gpl.html>.
@@ -13,5 +13,5 @@ Run COMMAND, with modified buffering operations for its standard streams.
.br
This will immedidately display unique entries from access.log
[BUGS]
On GLIBC platforms, specifying a buffer size, i.e. using fully buffered mode
On GLIBC platforms, specifying a buffer size, i.e., using fully buffered mode
will result in undefined operation.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
